Parameter list format:

The parameter list has the following format. The attributes should be sent in ascending numerical order. For details of attribute data see “MAM attribute data” on page 115.

 

 

7

 

6

 

5

 

 

4

 

 

3

 

 

2

 

1

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0

(MSB)

 

 

 

 

Parameter Data Length (n3)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

(LSB)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Attribute 1

 

 

 

 

 

 

 

 

 

a

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

m

 

 

 

 

 

 

 

Attribute x

 

 

 

 

 

 

 

 

 

n

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter This is not mandatory and will be ignored by the device server because it duplicates the Data Length Parameter List Length.

If the parameter data contains an attribute with an Attribute Length of zero, one of the following actions will occur:

If the attribute is read-only or unsupported, no attributes are changes. The command fails, returning CHECK CONDITION with ILLEGAL REQUEST sense and additional sense of 2600h (invalid field in parameter list).

If the attribute can be written to, it is deleted and will not be returned after a subsequent

READ ATTRIBUTE command.

If the attribute does not exist, the command cannot affect it. This is not considered an error.

Write Attribute specific status:

The command will be terminated and will return CHECK CONDITION under the following circumstances:

Description

Sense Key

Additional Sense

There is no cartridge present in the drive, not even

NOT READY

3A00h

(medium not present)

partially loaded.

 

 

 

 

 

 

 

The MAM is not accessible even though there is a tape

MEDIUM

0410h

(MAM not

in the drive. None of the attributes are changed.

ERROR

 

accessible)

 

 

 

 

The MAM has failed (for example from a bad

MEDIUM

0C0Bh

(MAM write error)

checksum)

ERROR

 

 

 

 

 

 

The Parameter List Length results in the truncation

ILLEGAL

1A00h

(parameter list length

of an attribute.

REQUEST

 

error)

 

 

 

 

The combination of Volume Number and Partition

ILLEGAL

2400h

(invalid field in CDB)

Number is not valid.

REQUEST

 

 

 

 

 

 

Commands

WRITE ATTRIBUTE 8Dh 181