READ MEDIA SERIAL NUMBERABh

READ MEDIA SERIAL NUMBER provides a method for the host application to read the serial number of the cartridge currently loaded in the drive.

Pre-execution checks:

Illegal Field Reservation Deferred Error Unit Attention Media Access

Command descriptor block:

 

 

7

 

6

5

4

 

3

2

1

0

 

 

 

 

 

 

 

 

 

 

 

 

0

 

 

 

 

Operation

Code (ABh)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

 

Reserved(0)

 

 

 

Service Action (01h)

 

 

 

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reserved (0)

 

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

(MSB)

 

 

 

Allocation Length

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

 

(LSB)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

 

 

 

 

Reserved(0)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

 

 

 

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CDB fields:

Service Action

01h The Service Action must be set to 01h.

 

 

Allocation

The maximum amount of data (in bytes) to be returned to the host. The drive will return

Length

the entire serial number string or allocation length bytes, whichever is least.

 

 

If there is no cartridge in the drive, the command is terminated with CHECK CONDITION status. The sense key is set to NOT READY with additional sense of 3A00h (medium not present).

Returned data:

The data returned depends on whether a barcode number has been stored in the LTO-CM using the WRITE ATTRIBUTE command. Storing this is the responsibility of the library controller or host application.

Commands

READ MEDIA SERIAL NUMBER ABh 125