Code | Description | Explanation |
2A 04h | Reservations released | The original persistent reservation has been replaced with |
|
| another of a different type or removed completely. |
2A 05h | Registrations | A PERSISTENT RESERVE OUT command was executed and |
|
| all registrations removed. |
2C 00h | Command sequence invalid | The use of the echo buffer was invalid. A WRITE BUFFER |
|
| command is necessary before a READ BUFFER command. |
30 00h | Incompatible medium installed | A |
|
| not supported on the type of tape that is loaded. |
30 01h | Unknown format | An operation could not be carried out because the tape in |
|
| the drive is of a format not supported by the drive. |
30 02h | Cannot read media: incompatible | An operation could not be completed because the logical |
| format | format is not correct. |
30 03h | Cleaning cartridge installed | An operation could not be carried out because the tape in |
|
| the drive is a cleaning cartridge. |
30 04h | Cannot write medium | An attempt was made to write to a cartridge that has |
|
| Cartridge Memory errors. |
30 05h | Cannot write medium, incompatible For example, the drive tried to write to a tape of an | |
| format | incompatible generation. |
30 07h | Cleaning failure | A cleaning operation was attempted but could not be |
|
| completed for some reason. |
30 0Ch | A write operation could not be executed because an | |
|
| overwrite has been attempted on a WORM cartridge. This |
|
| may be because an overwrite backup was specified |
|
| instead of an appended backup. |
30 0Dh | WORM | The drive has detected an inconsistency when performing |
| failed | an integrity check on a WORM cartridge. The cartridge |
|
| may have been tampered with. |
31 00h | Medium format corrupted | Data could not be read because the format on tape is not |
|
| valid, although it is in a known format. |
35 01h | Unsupported enclosure function | The drive cannot respond to this Enclosure Services |
|
| request. |
35 02h | Enclosure services unavailable | No compatible enclosure hardware has been detected by |
|
| the drive. |
37 00h | Rounded parameter | A Mode Select command parameter has been rounded |
|
| because the drive cannot store it with the accuracy of the |
|
| command. |
3A 00h | Medium not present | A |
|
| is no tape loaded. |
3A 04h | Medium not present, Media | A media access command has been received when the |
| Auxiliary Memory accessible | tape has been loaded but not threaded. This will be |
|
| reported if the hold bit of the LOAD CDB was set or the |
|
| Autoload field in the Control mode page is non zero. |
3B 00h | Sequential positioning error | A command has failed and left the logical position at an |
|
| unexpected location. |
3B 0Ch | Position past BOM | A SET CAPACITY command was received when the logical |
|
| position was not BOT, a necessary condition for this |
|
| command. |
3D 00h | Invalid bits in Identify message | An illegal Identify message has been received by the drive |
|
| at the start of a command. |
REQUEST SENSE 03h 161
Commands