HP Q153090901 Tape Usage log page

Parameter	Description	Type
36	Drive Temperature	Warning
37	Drive Voltage	Warning
38	Predictive Failure	Critical
39	Diagnostics Required	Warning
50	Lost Statistics	Warning
51	Tape Directory Invalid at Unload	Warning	Commands
52	Tape System Area Write Failure	Critical
53	Tape System Area Read Failure	Critical
54	No Start of Data	Critical
55	Loading Failure	Critical
56	Unrecoverable load Failure	Critical
57	Automation Interface Failure	Critical
58	Firmware Failure	Warning
59	WORM medium — integrity check failed	Warning
60	WORM medium — overwrite attempted	Warning

Tape Usage log page

The Tape Usage log page code is 30h. There are nine parameters. These are all read directly from the LTO-CM Tape Usage Log.

This data relates to the current tape and can be neither reset nor written.

Parm.	Description	Length	Updated When
1	Thread Count	4	Tape threaded
2	Total Data Sets Written	8	Data set physically written
3	Total Write Retries	4	Data set physically written
4	Total Unrecovered Write Errors	2	Data set physically written
5	Total Suspended Writes	2	Data set physically written
6	Total Fatal Suspended Writes	2	Data set physically written
7	Total Data Sets Read	8	Data set physically written
8	Total Read Retries	4	Data set physically written
9	Total Unrecovered Read Errors	2	Data set physically written

LOG SENSE 4Dh 67