NACA

0

The Normal ACA flag is 0, indicating that it is not supported.

 

 

 

HiSup

0

The Hierarchical Support flag is 0, indicating that the hierarchical

 

 

addressing model is not supported.

 

 

 

Response Data Format

2

The Inquiry Data format complies with the SCSI-3 standard.

 

 

Additional Length

The length in bytes of the length of the rest of the Inquiry data.

SCCS

0

No storage array controller component is embedded in the drive.

 

 

 

ACC

0

No Access Controls Coordinator may be addressed through this LUN.

 

 

 

TPGS

01b

Target Port Group Support. Only implicit asymmetric logical unit access is

 

 

supported.

 

 

 

3PC

0

Third-Party Copy commands are not supported.

 

 

 

Protect

0

Protection information is not supported.

 

 

BQue

Basic Queuing flag

 

0

The flag is zero for SCSI drives, with CmdQue = 1.

 

1

The flag is 1 for Fibre Channel drives, with CmdQue = 0.

 

 

 

EncSvr

0

The drive does not support Enclosure Services command.

 

 

 

VS

0

Vendor-Specific field—not currently used

 

 

 

MultiP

1

The drives has multiple ports.

 

 

 

MChngr

0

The drive is not embedded within or attached to a medium transport

 

 

element.

 

 

 

Adr16

1

16-Bit Addresses are supported. The flag is only valid for parallel SCSI.

 

 

 

WBus16

1

Wide Bus 16 is supported. The flag is only valid for parallel SCSI.

 

 

 

Sync

1

Synchronous data transfer is supported. The flag is only valid for parallel

 

SCSI.

 

 

 

 

 

Linked

0

The drive does not support linked commands.

 

 

 

CmdQue

0

For FC drives, with BQue = 1.

 

1

For SCSI drives, with BQue = 0.

 

 

Vendor

A vendor-specific, 8-byte string of ASCII characters, left justified and padded

Identification

with space characters “HP”.

Product Identification A left-justified, vendor-specific, 16-byte string field of ASCII characters with space character padding on the right. The string consists of two parts:

• First half (bytes 16–23): “Ultrium”

• Second half (bytes 24–31): “<generation>-<interface type>” The following strings have been defined:

Gen 1 SCSI drive: “Ultrium 1-SCSI”

All Gen 2 drives: “Ultrium 2-SCSI”

All Gen 3 drives: “Ultrium 3-SCSI”

42 Commands