hp digital copier 610 printing and software guide

 

6 Click OK to close the Print Settings dialog box.

restore factory

Use the Factory Settings function to restore the original default settings

defaults

related to the Setup tab.

use the features tab

The Features tab allows you to adjust the following printer settings:

•print on both sides of the page

•adjust the ink volume and dry time

•print multiple pages on a single sheet

•print a poster

•print a watermark

•print last page first

•enable the hp preview feature

•set the number of copies

print on both sides of the page

Whenever you make a change in print settings in this tab, you can confirm your change by viewing the image in the right corner or by enabling the HP Preview feature. For more information, see enable the hp preview feature on page 23.

You can print two-sided pages with your HP Digital Copier. When printing two-sided pages, make sure to use paper that is thick enough so the images do not show through to the other side. Some paper types, such as transparencies and photo papers, have only one printing surface and should not be used for two-sided printing.

Tip! To automatically print on both sides of the page, you must have a two-sided printing accessory installed and activated. The two-sided printing accessory is standard equipment on some models. It can be purchased as an accessory for all other models. For more information about the accessory, see the HP Digital Copier 510/610 Reference Guide.

1If you are using Windows 2000 or XP, make sure that the Automatic Two-Sided Printing Module option is activated. For more information, see use the configuration tab on page 26.

Tip! If you have a two-sided printing accessory, the Automatic option is selected by default. If you do not have a two-sided printing accessory, the option is not available.

2Select File, Print, select hp digital copier color series, then click Properties.

3Click the Features tab.

20

use printing features