display the toolbox

calibrate your printer

clean the printheads

hp digital copier 610 printing and software guide

Use one of the following methods to open the Toolbox:

•Click Start, point to Programs or All Programs, point to Hewlett- Packard, point to hp digital copier, then click Open the HP Toolbox.

•Right-click the taskbar icon, if available, then select Open Toolbox.

•In an open document, select File, Print, then Properties. In the Properties dialog box, select the Services tab then click Open the HP Toolbox.

This option automatically aligns the printheads in your copier/printer.

1In the Services tab, click Open the HP Toolbox.

2In the Device Services tab, click Calibrate the Device.

3Click Calibrate to start the calibration process.

Use this feature when the Self-Test Report, which is generated from the front panel, shows streaking or white lines through any of the colored bars. Do not clean printheads unnecessarily; this wastes ink and shortens the life of your printheads.

Tip! Although this feature is available in the Services tab, we recommend that you use the front panel instead.

1In the Services tab, click the Open the HP Toolbox icon.

2In the Device Services tab, click Clean the Printheads.

3On the next screen, click Clean.

A dialog box will appear with the options Immediate Clean or Done.

–If the print quality on the test page is poor, click Immediate Clean.

–If the print quality on the test page is good, click Done.

If you select Immediate Clean, a new test page will print and a new screen will appear with the options, Prime or Done.

–If the print quality if poor, click Prime.

–If the print quality on the test page is good, click Done.

If you select Prime, a new test page will print and a new screen will appear with the options Clean Again or Done. Select Clean Again if further cleaning is needed or click Done.

4When you are finished, click Close.

use the services tab

25