hp digital copier 610 printing and software guide

print a test page

check ink levels

use the configuration tab

This tool allows you to confirm that the connection between your copier/ printer and your computer are working properly. This test page is different than the Self-Test Report that you can print from the front panel.

1In the Services tab, click the Open the Toolbox icon.

2Click Print a Test Page.

The report is generated as long as your connection is working properly.

You can easily check the ink supply level to determine how soon you may need to replace an ink cartridge. This tab is not available to users of Windows 98 and Me.

The Estimated Ink Level tab displays the following:

•Approximate ink level for each ink cartridge

•Ordering information

For more precise ink level information, print a Self-Test Report from the front panel.

Use the Configuration tab to activate the following optional functions. This tab in not always available to users of Windows 98 and Me since some configurations run these features automatically, without user activation.

•Automatic Two-Sided Print Module: Use to activate or deactivate the two-sided printing accessory that allows you to print two-sided copies.

•Display Print Settings Confirmation: Use to activate or set system messages.

perform special print jobs

In addition to supporting standard print jobs, your HP Digital Copier supports the following special printing jobs:

•print a banner

•print a presentation on transparency film

•print a group of addresses on labels or envelopes

print a banner For best results, we recommend that you use HP banner paper with your HP Digital Copier.

1Remove all paper from both paper trays, and then load the banner paper.

2Raise the output tray above the catch on the right side of the HP Digital Copier.

For more information, see load specialty paper for printing on page 2.

3In the program you are printing from, display the print settings, and click the Setup tab.

26

use printing features