HP SR1120NX, SA4000Z (P8657M), SA4000T (P8657L) manual Disconnecting the TV, Ge Force Tab Disabling

4When the PC image appears on the monitor screen, click Yes to keep the setting. You have 15 seconds to accept this new setting before it reverts to the previous setting.

5Click the OK button to save changes, and then click OK again to close the Display Properties window.

Ge Force Tab (Disabling)

1 Click the Ge Force FX xxxx tab.

2In the area nView Modes select Single display from the drop-down list. In the area Current display select Analog Display or Digital Display.

3Click the Apply button.

4When the PC image appears on the monitor screen, click Yes to keep the setting. You have 15 seconds to accept this new setting before it reverts to the previous setting.

5Click the OK button to save changes, and then click OK again to close the Display Properties window.

Displays Tab (Disabling)

1Click the Displays tab. This tab shows a monitor and a TV. The upper-left corner of each display icon is a button and a status indicator. A red corner indicates an inactive display; a green corner indicates an active display.

2Click the upper-left corner of the TV icon so it is red, and then click the upper- left corner of the monitor icon so it is green. Click Apply button.

3When the PC image appears on the monitor screen, click Yes to keep the setting. You have 15 seconds to accept this new setting before it reverts to the previous setting.

4Click the OK button to save changes, and then click OK again to close the Display Properties window.

Disconnecting the TV

1Disable the TV option. See the previous procedure.

2Turn off the TV and the PC.

3Remove the video cable from the TV and the PC.

4Remove the audio cable from the TV and the PC.

5Reconnect your PC speaker cable to the Line Out jack (lime green connector) on the back of the computer.

30Getting Started Guide