Saving an Image
1Click Start, choose All Programs, CD (DVD) Recorder, RecordNow!, and then click RecordNow! again.
2Select the Backup Projects tab.
3Select Save Image.
4Insert the source disc into the drive.
5Click Browse to set the destination and name of the image file.
6Click the Save icon to create the image file.
Burning an Image
1Click Start, choose All Programs, CD (DVD) Recorder, RecordNow!, and then click RecordNow! again.
2Select the Backup Projects tab.
3Select Burn Image.
4Click the Browse button to locate your saved image file.
5Click the Burn icon.
6Insert a blank CD or DVD into the drive.
7Click Done when recording is complete.
About Recording Video Files
Video quality depends on the quality of the source files, the PC speed, and its graphics processing ability. Refer to the ”Recording VHS Video Files Direct to DVD” section on page 64 of this guide.
NOTE: Your DVD Writer or CD Writer drive will not copy commercially available DVD movies. Most commercial DVDs are encoded to prevent unauthorized duplication.
Disc Labels
WARNING: When labeling your DVDs, do not use sticky labels. They can cause the DVD to play erratically. Instead, write on the DVD with a felt tip pen to label it.
Creating Recovery CD/DVDs for the PC
For more information about creating Recovery CDs/DVDs, refer to the Warranty and Support Guide that came with your PC.
