13.Update the controller firmware, if necessary. See “Verifying and updating controller firmware offline” (page 14).
14.Determine whether the controller is in RAID mode; if not, then set it to RAID mode. See “Determining and setting the controller mode” (page 19).
15.Update the storage enclosure firmware, if necessary. See “Verifying and updating enclosure firmware offline” (page 21).
16.(Optional) Set the Smart Array P411/256 as the boot controller. For more information about setting the boot controller, see the server documentation.
17.Configure an array. See “Creating a logical drive” (page 28).
Installation overview | 7 |
