HP Split 13 x2 E0W59UARABA manual Memory module, Description Spare part number

Memory module

Description	Spare part number
2-GB memory module (PC3L-12800, 1600-MHz, DDR3)	691739-005
4-GB memory module (PC3L-12800, 1600-MHz, DDR3)	691740-005
8-GB memory module (PC3L-12800, 1600-MHz, DDR3)	693374-005

Before removing the memory module, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32).

5.Remove the display rear cover (see Display rear cover on page 45).

6.Disconnect the battery cable (see Battery cable on page 46).

Remove the memory module:

1.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)

2.Remove the memory module (2) by pulling the module away from the slot at an angle.

NOTE: Memory modules are designed with a notch to prevent incorrect insertion into the memory module slot.

Reverse this procedure to install a memory module.

Tablet components 47