HP Split 13 x2 E0W59UARABA manual MSATA Solid-State drive SSD

mSATA Solid-State drive (SSD)

Description	Spare part number
64-GB mSATA SSD drive	732293-001
128-GB mSATA SSD drive, TLC	732294-001
128-GB mSATA SSD drive, MLC	747220-001

Before removing the mSATA drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32).

5.Remove the display rear cover (see Display rear cover on page 45).

6.Disconnect the battery cable (see Battery cable on page 46).

Remove the mSATA drive:

1.Remove the Phillips PM2.5×3.0 screw (1) that secures the drive to the tablet.

2.Lift the drive to a 45-degree angle, and then pull it away to remove it from the socket (2).

Reverse this procedure to install the mSATA drive.

Tablet components 53