HP T1000 UPS front panel controls and LED indicators

UPS front panel controls and LED indicators

Item	Description	Function
1	Power On/Standby	Turns the UPS power on and off, and places the UPS in Standby mode.1
	button
2	Output Load Level LED	Shows approximately how much of the UPS power capacity is used to
		support the equipment connected to the output receptacles.
		Red—Maximum load
		Amber—Medium load
		Green—Light load
3	Power LED	Green—The UPS is on and supplying connected equipment with AC
		power.
		Flashing green—The UPS is operating from its internal batteries during a
		blackout or severe brownout. If the blackout or brownout is prolonged,
		save any open files and shut down the connected equipment.
4	Voltage Correction LED	Green—The UPS is automatically correcting high or low AC voltage on
		the utility line without the assistance of battery power. The UPS will emit a
		slight clicking noise.
5	Battery Warning LED	Amber—During a self-test, the UPS found that the batteries must be
		recharged. Charge the batteries and repeat the self-test ("Initiating a self-
		test" on page 19).

Component identification 7