Installation
In this section |
|
Precautions | 12 |
Electrical requirements | 12 |
Checking the battery recharge date | 13 |
Connecting the batteries | 13 |
Selecting the UPS voltage configuration | 14 |
Connecting the host computer | 15 |
Connecting the Network Transient Protectors | 16 |
Connecting the UPS to utility power | 17 |
Connecting devices to the UPS | 17 |
Charging the UPS batteries | 17 |
Powering up the UPS | 18 |
Precautions
Save these instructions. This document contains important safety instructions that should be followed during installation, operation, and maintenance of the UPS and batteries.
WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The installation of options and routine maintenance and service of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and hazards associated with AC power products.
WARNING: To prevent personal injury from earth conductor leakage current:
•Do not operate the UPS while disconnected from the utility power source.
•Disconnect load devices before disconnecting the UPS from the utility power source.
WARNING: To prevent personal injury, prepare the area and observe all materials handling procedures when transporting the UPS. When fully assembled, the UPS weighs 20.3 kg (44.8 lb).
WARNING: To prevent personal injury, prepare the area and observe all materials handling procedures when transporting the UPS. When fully assembled, the UPS weighs 15.9 kg (35 lb).
Electrical requirements
WARNING: To prevent fire or electric shock, install the unit in a temperature- and
Installation 12
