HP tm2-1013tx, tm2-1073nr, tm2-1070us, tm2-1079cl, tm2-1072nr, tm2-1020tx, tm2-1016tx manual Hard drive

Hard drive

NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar cover.

Description	Spare part number
500-GB, 7200-rpm	584381-001
320-GB, 7200-rpm	584380-001
250-GB, 7200-rpm	584379-001
160-GB, 7200-rpm	584378-001
Hard Drive Hardware Kit (includes hard drive bracket and hard drive screws)	584382-001

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power cord.

4.Remove the battery (see Battery on page 39).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Loosen the two Phillips PM2.0×5.0 captive screws that secure the hard drive cover to the computer.

ENWW Component replacement procedures 41