Bluetooth module
Description | Spare part number |
|
|
Bluetooth module | |
|
|
Bluetooth module cable | |
|
|
Before removing the Bluetooth module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power cord.
4.Remove the battery (see Battery on page 39).
5.Remove the following components:
a.Hard drive (see Hard drive on page 41)
b.Optical drive (see Optical drive on page 43)
c.Keyboard (see Keyboard on page 49)
d.Switch cover (see Switch cover on page 51)
e.Display assembly (see Display assembly on page 53)
f.Top cover (see Top cover on page 56)
Remove the Bluetooth module:
1.Disconnect the Bluetooth module cable (1) from the system board.
2.Remove the Phillips PM2.0×3.0 screw (2) that secures the Bluetooth module to the system board.
3.Remove the Bluetooth module (3).
Component replacement procedures 61
