HP TX2500 manual Hard drive

Hard drive

Description	Spare part number
500-GB, 5400-rpm	497515-001
400-GB, 5400-rpm	500141-001
320-GB, 5400-rpm	463643-003
250-GB, 5400-rpm	457061-003
160-GB, 5400-rpm	441128-003
120-GB, 5400-rpm	441127-003
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and hard drive	497744-001
screws)

Before removing the hard drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power cord.

4.Remove the battery (see Battery on page 39).

Remove the hard drive:

1.Position the computer with the front toward you.

2.Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer.

3.Lift the left side of the hard drive cover (2) and swing it to right.

4.Remove the hard drive cover.

NOTE: The hard drive cover is included in the Plastics Kit, spare part number 487926-001.

Component replacement procedures 41