System interrupt specifications | 82 |
System I/O address specifications | 83 |
System memory map specifications | 85 |
7 Screw listing |
|
Phillips PM3.0×3.0 screw | 86 |
Phillips PM2.0×7.0 screw | 87 |
Phillips PM2.0×4.0 screw | 88 |
Phillips PM2.0×5.0 captive screw | 90 |
Black Phillips PM2.0×3.0 screw | 91 |
Phillips PM2.0×11.0 screw | 92 |
Phillips PM2.5×6.0 screw | 93 |
Silver Phillips PM2.0×3.0 screw | 94 |
8 Backup and recovery |
|
Recovering system information | 95 |
Creating recovery discs | 95 |
Backing up your information | 96 |
When to back up | 96 |
Backup suggestions | 97 |
Using system restore points | 97 |
When to create restore points | 97 |
Create a system restore point | 97 |
Restore to a previous date and time | 99 |
Performing a recovery | 100 |
Recovering from the recovery discs | 100 |
Recovering from the partition on the hard drive | 100 |
9 Connector pin assignments |
|
101 | |
101 | |
External monitor | 102 |
103 | |
103 | |
104 | |
Universal Serial Bus | 104 |
10 Power cord set requirements |
|
Requirements for all countries or regions | 105 |
Requirements for specific countries or regions | 106 |
vii
