2 HP-UX Systems
HP Servers and Workstations—HP-UX 11.x
NOTE:
Introduction
Before you install your tape drive log on to the HP web site, www.hp.com, and download the latest hardware enablement patch bundle for your operating system. This ensures that you will have the correct device driver for your tape drive.
Determining the SCSI ID
Before you configure your system to support your new HP Ultrium drive, you need to determine what SCSI ID to use. The SCSI ID must be unique for each device attached to the SCSI bus. To list the existing devices, use the following command:
% /sbin/ioscan
The output of this should look similar to the following example:
Class I H/W Path Driver S/W State H/W Type Description
=================================================================================
bc | 0 |
| root | CLAIMED | BUS_NEXUS |
|
bc | 1 | 8 | bc | CLAIMED | BUS_NEXUS | Psudo Bus Converter |
ba | 0 | 8/0 | GSCtoPCI | CLAIMED | BUS_NEXUS | GSCtoPCI Bridge |
ext_bus | 1 | 8/0/2/0 | c720 | CLAIMED | INTERFACE | SCSI C895 Ultra2 Wide LVD |
target | 0 | 8/0/2/0.7 | tgt | CLAIMED | DEVICE |
|
ctl | 1 | 8/0/2/0.7.0 | sctl | CLAIMED | DEVICE | Initiator |
lan | 0 | 8/0/20/0 | btlan3 | CLAIMED | INTERFACE | PCI(10110019) |
ba | 1 | 8/16 | bus_adapter | CLAIMED | BUS_NEXUS | Core I/O Adapter |
tty | 0 | 8/16/4 | asio0 | CLAIMED | INTERFACE | |
ext_bus | 2 | 8/16/5 | c720 | CLAIMED | INTERFACE | |
target | 1 | 8/16/5.5 | tgt | CLAIMED | DEVICE |
|
disk | 0 | 8/16/5.5.0 | sdisk | CLAIMED | DEVICE | SEAGATE ST34573N |
target | 2 | 8/16/5.7 | tgt | CLAIMED | DEVICE |
|
ctl | 2 | 8/16/5.7.0 | sctl | CLAIMED | DEVICE | Initiator |
processor | 0 | 62 | processor | CLAIMED | PROCESSOR | Processor |
memory | 0 | 63 | memory | CLAIMED | MEMORY | Memory |
After you have installed the new tape drive, you can check that it has been attached successfully. From a shell window (hpterm/xterm), execute ioscan to display the list of attached devices.
HP-UX Systems
HP Servers and
