HP Ultrium Tape Drive manual General documents and standardization, How error correction works

	SCSI Drives	FC Drives
Handling errors	2 SW Integration: ch. 5
How error correction works	6 Background: ch. 4
Logs—see the LOG SENSE command		3 SCSI: ch. 4
Recovering from write and read errors	2 SW Integration: ch. 7
Software response to error correction	2 SW Integration: ch. 3
Software response to logs	2 SW Integration: ch. 3
TapeAlert log	2 SW Integration: ch. 7

Ultrium features

	SCSI Drives	FC Drives
Adaptive Tape Speed (ATS)	6 Background: ch. 1
Autoload	1 HW Integration: ch. 2
Automation Control Interface (ACI)	1 HW Integration: ch. 2
	6 Background: ch. 1
Cartridge Memory (LTO-CM)	1 HW Integration: ch. 2
	2 SW Integration: ch. 5
	6 HW Integration: ch. 5
Data Compression, how it works	6 Background: ch. 5
Data Compression, managing	2 SW Integration: ch. 5
Design principles	6 Background: ch. 1
OBDR and CD-ROM emulation	6 Background: ch. 1
	2 SW Integration: ch. 7
Performance optimization	1 HW Integration: ch. 8	n/a
	2 SW Integration: ch. 1
Performance, factors affecting	2 SW Integration: ch. 4
Software design	2 SW Integration: ch. 1
Supporting Ultrium features	2 SW Integration: ch. 5
Ultrium Format	6 Background: ch. 2

General documents and standardization

•Small Computer System Interface (SCSI-1), ANSI X3.131-1986. This is the ANSI authorized standard for SCSI implementation, available through ANSI

•Enhanced Small Computer System Interface (SCSI-2), ANSI X3T9.2-1993 Rev. 10L, available through ANSI

8