ClusterPack V2.5 Release Note
QuickStart Install Instructions
Step 12. Power Up the Compute Nodes
Use the clbootnodes program to power up all Compute Nodes that have a connected Management Processor that you specified in the previous step. Provide the following information to the Compute Nodes:
•Language to use
•Host name
•Time and time zone settings
•Network configuration
•Root password
Step 13. Run compute_config on the Management Server
The compute_config program will register the nodes with various programs.
Step 14. Run finalize_config on the Management Server
This program completes the installation and configuration process, verifies the Cluster Management Software, and validates the installation. If it reports diagnostic error messages, repeat the installation process, performing all steps in the order specified.
12