HP UX Developer Tools manual Hp-Ux

ClusterPack V2.5 Release Note

Comprehensive Install Instructions

Background

ClusterPack works on HP Integrity Servers running HP-UX. In order to install ClusterPack, the Technical Computing Operating Environment (TCOE) version of HP-UX must be installed. You must also have the Ignite-UX software, which is used for installation. Installing Ignite-UX on the Compute Nodes makes it possible to create and distribute ‘Golden Images’ from the Compute Nodes.

ClusterPack requires a homogeneous operating system environment. That is, all Compute Nodes and the Management Server must have the same release of HP-UX installed as well as the same operating environment.

Overview

HP-UX 11iv2

Install the following software on the Management Server and on one Compute Node:

•HP-UX 11iv2 or TCOE

•HP-UX 11i Ignite-UX (B5725AA)

ClusterPack depends on certain open source software which is normally installed as a part of the operating environment. The minimum release versions required are:

•Perl Version 5.8 or higher

HP-UX 11iv3

Install the following software on the Management Server and on one Compute Node:

•HP-UX 11iv3 or TCOE

•HP-UX 11i Ignite-UX (IGNITE)

ClusterPack depends on certain open source software which is normally installed as a part of the operating environment. The minimum release versions required are:

•Perl Version 5.8 or higher

The Management Server requires a minimum of two LAN connections. One connection must be configured prior to installing ClusterPack.

The Compute Nodes must have Management Processor (MP) cards.

15