HP UX Red Hat Direry Server Software manual

Initializing a Database from the Console

contains some entries that already exist in the database in addition to new ones. The server notes existing entries in the rejects file while adding all new entries.

4.In the File for Rejects field, enter the full path to the file in which the server is to record all entries it cannot import, or click Browse to select the file which will contain the rejects.

A reject is an entry which cannot be imported into the database; for example, the server cannot import an entry that already exists in the database or an entry that has no parent object. The Console will write the error message sent by the server to the rejects file.

Leaving this field blank means the server will not record rejected entries.

5.Click OK.

The server performs the import and also creates indexes.

NOTE

Trailing spaces are dropped during a remote Console import but are preserved during both local Console or ldif2db import operations.

1.2. Initializing a Database from the Console

The existing data in a database can be overwritten by initializing databases.

You must be logged in as the Directory Manager in order to initialize a database because an LDIF file that contains a root entry cannot be imported into a database except as the Directory Manager (root DN). Only the Directory Manager has access to the root entry, such as dc=example,dc=com.

CAUTION

When initializing databases from an LDIF file, be careful not to overwrite the o=NetscapeRoot suffix unless you are restoring data. Otherwise, initializing the database deletes information and may require re-installing the Directory Server.

To initialize a database using the Directory Server Console, do the following:

1.Select the Configuration tab.

2.Expand the Data tree in the left navigation pane. Expand the suffix of the database to initialize, then click the database itself.

115

Image 135

HP UX Red Hat Direry Server Software manual Initializing a Database from the Console

Contents

Administrators Guide Red Hat Directory Server Copyright 2008 Red Hat, Inc Red Hat Directory Server 8.0 Administrators Guide Red Hat Directory Server General Red Hat Directory Server Usage Creating a New Database Link Creating and Maintaining SuffixesCreating and Maintaining Databases Creating and Maintaining Database LinksPage Red Hat Directory Server Page Red Hat Directory Server Page Red Hat Directory Server Page Red Hat Directory Server Page Xvi Preface Directory Server Overview Preface Example and Default ReferencesWhen shown as below, it indicates computer output Document Conventions Xix Document Conventions Related Information Chapter Directory Server File Locations Red Hat Enterprise Linux 4 and 5 General Red Hat Directory Server UsageFile or Directory Location Binaries Sun Solaris 9 sparcHP-UX 11i IA64 Ldap Tool Locations Opt/dirsrv/bin Ldap Tool LocationsStarting and Stopping Servers Platform Directory Location Starting and Stopping Directory Server from the Console Starting and Stopping Directory Server fromStart the Directory Server Console Solaris uses /etc/init.d Starting and Stopping Administration Server HP-UX has a different location for the script On Solaris, the service is init.dStarting the Directory Server Console Console Click Log on to the Directory Server as a New User Changing Login IdentityLogin screen Logging into Directory Server Changing Directory Server Port Numbers Viewing the Current Console Bind DNViewing the Current Console Bind DN General Red Hat Directory Server Usage Creating a New Directory Server Instance Open the Administration Server ConsoleConfiguration tab, select the Configuration DS tab Creating a New Directory Server Instance Configuring the Directory Manager Configuring the Directory Manager Page Creating a Root Entry Managing Entries from the Directory Console Template Object Class Directory Server Console, select the Configuration tabCreating Directory Entries Creating Directory Entries Entry Templates and Corresponding Object Classes Creating an Entry Using a Predefined TemplateRole NsRoleDefinition Class of Service CosSuperDefinition Creating Other Types of Entries Displaying the Property Editor Modifying Directory Entries Modifying Directory Entries Adding an Object Class to an EntryRemoving an Object Class Adding an Attribute to an Entry Adding Very Large Attributes Removing an Attribute Value Adding Attribute Values Instead, use Adding an Attribute SubtypeLanguage Subtype Binary Subtype Deleting Directory Entries Deleting Directory EntriesPronunciation Subtype Adding a Subtype to an Attribute Managing Entries from the Command-Line Providing Input from the Command-LineEntries, use Ctrl or Shift Select Delete from the Edit menu Creating a Root Entry from the Command-Line See , Ldif Update StatementsCreating a Root Entry from Adding Entries Using Ldif Adding and Modifying Entries Using ldapmodifyImport the Ldif file from the Directory Server Console Adding Entries Using ldapmodify Command-LineParameter Name Description Modifying Entries Using ldapmodify Input from the Command-LineLdapmodify Parameters Used for Adding Entries Hostname is cyclops Server uses port number Deleting Entries Using ldapdeleteDeleting Entries Using ldapdelete Ldapmodify Parameters Used for Modifying Entries This ldapdelete example has the following values Are branch points in the directory tree Ldapdelete Parameters Used for Deleting Entries Using Special CharactersUsing Special Characters Tracking Modifications to Directory Entries Ldif Update Statements Select the Track Entry Modification Times checkboxOpen the Tasks tab, and click Restart Directory Server General format of Ldif update statements is as follows Ldif Update Statements Following sections describe the change types in detail Adding an Entry Using Ldif Renaming an Entry Using Ldif Renaming an Entry Using LdifFollowing command renames Sue Jacobs to Susan Jacobs Addattribute Modifying an Entry Using Ldif Adding Attributes to Existing Entries Using Ldif Modifying an Entry Using LdifFollowing example adds two telephone numbers to the entry Changing an Attribute Value Using Ldif Deleting All Values of an Attribute Using Ldif Deleting a Specific Attribute Value Using LdifEntry is now as follows Barneys entry then becomes Deleting an Entry Using Ldif Modifying an Entry in an Internationalized Maintaining Referential IntegrityModifying an Entry in an Internationalized Directory How Referential Integrity Works Using Referential Integrity with Replication Directory Modifying the Update IntervalYou can enable or disable referential integrity as follows Enabling/Disabling Referential Integrity Modifying the Attribute List Modifying the Attribute List TIPPage A Sample Directory Tree with One Root Suffix Creating and Maintaining Suffixes Configuring Directory Databases Creating Suffixes 1, Using Referrals in a SuffixCreating Suffixes Creating Suffixes A Sample Directory Tree with a Sub Suffix Creating a New Sub Suffix Using the Console Creating a New Root Suffix Using the Console Creating Root and Sub Suffixes from the Command-Line Attribute Name Value Creating and Maintaining Databases for Creating and Maintaining Database Links forAttribute. See , Creating Maintaining Databases for more information Using Referrals in a Suffix Maintaining SuffixesSuffix Attributes To requests from client applications Click Save Enabling Referrals Only During Update OperationsDisabling a Suffix Maintaining Suffixes Creating and Maintaining Databases Creating DatabasesDeleting a Suffix Creating Databases Configuring Directory Databases For example, add a new database to the server example1 Adding Multiple Databases for a Single Suffix Configuring Directory Databases Placing a Database in Read-Only Mode Maintaining Directory DatabasesMaintaining Directory Databases Change the read-only attribute to on Making a Database Read-Only Using the ConsoleMaking a Database Read-Only from the Command Line Select the database is read-only checkbox Click Save, and then restart the server Placing the Entire Directory Server in Read-Only ModeDeleting a Database Select the Make Entire Server Read-Only checkbox Database Encryption Configuring Transaction Logs for Frequent Database Updates Database Encryption Encryption Keys Configuring Database Encryption from the Console Encryption CiphersSelect the Attribute Encryption tab Configuring Database Encryption Using the Command-Line Run the ldapmodify command1Exporting and Importing an Encrypted Database See .3, Importing from the Command-Linefor more information Creating and Maintaining Database Links Configuring the Chaining PolicyCreating and Maintaining Database Links Chaining Component Operations NsActiveChainingComponents Cn=resource Component Name Description Permissions NsActiveChainingComponents Cn=certificate-based Configuring the Chaining Policy Components Allowed to Chain Chaining Component Operations Using the Console Chaining Component Operations from the Command-Line Chaining Ldap ControlsPlug-in Chaining Ldap Controls from the Command-Line Chaining Ldap Controls Using the Console Creating a New Database Link Creating a New Database Link Using the ConsoleCreating a New Database Link Ldap Controls and Their OIDs Configuring Directory Databases Specify the configuration information for the database link Creating a Database Link from the Command-Line Providing Bind Credentials Providing Suffix Information NsMultiplexorBindDN cannot be that of the Directory Manager Providing an Ldap URL Attributes Value Summary of Database Link Configuration AttributesProviding a List of Failover Servers File Operations 1, Chaining Component Attributes Value Run ldapmodify1 to add a database link to server a Create an administrative user on server B, as follows Maintaining Database Links Chaining Using SSLUpdating Remote Server Authentication Information Enable SSL on the server that contains the database link Database Links and Access Control Evaluation Database Links and Access ControlDeleting Database Links Configuring Directory Databases Evaluation Advanced Feature Tuning Database Link PerformanceManaging Connections to the Remote Server Using the Console Managing Connections to the Remote Server Attribute Name Description Detecting Errors During Normal Processing Advanced Feature Tuning Database LinkDatabase Link Connection Management Attributes Managing Threaded Operations Database Link Processing Error Detection Parameters Advanced Feature Configuring Cascading Chaining Overview of Cascading ChainingPerformance Configuring Directory Databases Advanced Feature Configuring Cascading Configuring Cascading Chaining Defaults Using the Console Configuring Cascading Chaining Using the Console Chaining Configuring Cascading Chaining from the Command-Line Configuring Directory Databases Summary of Cascading Chaining Configuration Attributes Detecting LoopsAttribute Description Cascading Chaining Configuration Example Cascading Chaining Configuration AttributesAci This attribute must contain the following ACI 101 Configuring Server One 102 Configuring Server Two 103 Configuring Directory Databases Allow this Configuring Server Three Using Referrals Starting the Server in Referral ModeClient on server two Setting Default Referrals Setting Default ReferralsSetting a Default Referral Using the Console Setting a Default Referral from the Command-Line Creating Smart Referrals Creating Smart Referrals Using the Directory Server Console Creating Smart Referrals from the Command Line Creating Smart Referrals109 Creating Suffix Referrals Creating Suffix Referrals Using the Console Creating Suffix Referrals Creating Suffix Referrals from the Command-Line Configuring Directory Databases Importing Data Import Method ComparisonAction Import Initialize Database Importing a Database from the Console Populating Directory DatabasesFollowing sections describe importing data Initializing a Database from the Console Initializing a Database from the Console Importing Using the ldif2db Command-Line Script Importing from the Command-Line Option Description Importing from the Command-Line Importing Using the ldif2db.pl Perl Script Ldif2db ParametersRun the ldif2db script Ldif2db Options Importing Using the ldif2ldap Command-Line ScriptRun the ldif2ldap command-line script Exporting Data Splitting a Database Contents into Two Databases Exporting Directory Data to Ldif Using Exporting Directory Data to Ldif Using the Console Exporting to Ldif from the Command-Line Exporting a Single Database to Ldif Using the Console With the -noption or 123 Run the db2ldif command-line scriptLdif file in this case would be Directory and is automatically named Db2ldif Options Backing up and Restoring DataBacking up All Databases Backing up All Databases from the Server Console Click Back Up Directory Server Backing up All Databases from the Command-LineRun the db2bak command-line script Backing up All Databases Restoring All Databases Backing up the dse.ldif Configuration FileClick Restore Directory Server Restore Directory dialog box is displayed 126 Restoring All Databases Restoring Your Database from the Command-LineUsing the bak2db Command-Line Script Using bak2db.pl Perl Script Restoring a Single Database Run the bak2db.pl Perl scriptRestart the Directory Server Restoring the dse.ldif Configuration File Restoring Databases That Include Replicated EntriesRestoring Databases That Include 130 About Roles Using Roles Managing Entries with Roles, Class of Service, and Views Managing Roles Using the Console Managing Roles Using the Console 134 Creating a Managed Role Creating a Filtered Role Follow the steps of .2.1, Creating a Managed Role135 136 Creating a Nested RoleViewing and Editing an Entrys Roles Create a new role, as in .2.1, Creating a Managed Role Modifying a Role Entry Making a Role Inactive137 Deleting a Role Reactivating a Role Dialog box appears to confirm the deletion. Click Yes Managing Roles Using the Command-LineManaging Roles Using the Command-Line Object Classes and Attributes for Roles Examples Managed Role Definition 141 Example Filtered Role Definition Example Nested Role Definition Using Roles Securely Assigning Class of Service Assigning Class of Service About the CoS Definition Entry About CoS About the CoS Template Entry How a Pointer CoS WorksAbout CoS Sample Pointer CoS How an Indirect CoS Works Sample Indirect CoS How a Classic CoS Works Sample Classic CoS Searches for CoS-Specified Attributes Managing CoS Using the Console Managing CoS Using the ConsoleCreating a New CoS 150 Property Editor opens Creating the CoS Template Entry Deleting a CoS Editing an Existing CoS CoS Type Object Classes Description Managing CoS from the Command-LineCreating the CoS Definition Entry from the Command-Line Managing CoS from the Command-Line CoS Definition Entry Object Classes CoS Definition Entry AttributesAttribute Definition Managing CoS from the Command-Line Indirect CoS CoS DefinitionsCoS Type CoS definition Pointer CoS Be added to any other search filter using or Creating the CoS Template Entry from the Command-Line 158 Example of a Pointer CoS Create the template entry Example of an Indirect CoS Example of a Classic CoS Creating Role-Based Attributes Creating Role-Based AttributesClassic CoS definition entry looks like Access Control and CoS Using Views Creating Views in the Console Creating Views in the Console Deleting Views from the Directory Server Console Creating Views from the Command Line Managing Static Groups Using GroupsDeleting Views from the Command Line Deleting Views from the Command Line Modifying a Static Group Adding a New Static Group Managing Dynamic Groups Managing Dynamic GroupsAdding a New Dynamic Group Modifying a Dynamic Group 168 ACI Structure Access Control Principles ACI Limitations ACI PlacementManaging Access Control ACI Evaluation Default ACIs Default ACIs Creating ACIs Manually Aci attribute uses the following syntax ACI SyntaxDefining Targets Defining Targets Targetfilter Ldif Target KeywordsKeyword Valid Expressions Wildcard Allowed Targetattr 175 Targeting a Directory Entry Targeting Attributes 177 Targeting Both an Entry and Attributes 178 Targeting Entries or Attributes Using Ldap Filters Targeting Attribute Values Using Ldap Filters Targeting a Single Directory Entry Defining Permissions Assigning rights Allowing or Denying AccessAssigning Rights Defining Permissions Proxy rights Rights Required for Ldap OperationsUser Rights Selfwrite to the targeted entry, excluding 183 Access Control and the modrdn Operation Bind RulesPermissions Syntax Yes, in DN only Bind Rule SyntaxBind Rule Syntax Userdn Dns Defining User Access userdn KeywordLdif Bind Rule Keywords Groupdn Ldap///DN DN Roledn Userattr Parent Access parent Keyword Anonymous Access anyone KeywordGeneral Access all Keyword Self Access self Keyword Wildcards ExamplesScenExamplerio Description Userdn Keyword Examples Defining Group Access groupdn Keyword Defining Group Access groupdn Keyword Defining Role Access roledn KeywordGroupdn Examples Defining Access Based on Value Matching Using the userattr KeywordDefining Access Based on Value Matching Example with Userdn Bind Type Example with Groupdn Bind TypeAttrValue is any string representing an attribute value Example with Roledn Bind Type Example with Ldapurl Bind Type193 Example with Any Attribute Value Using the userattr Keyword with Inheritance Granting Add Permission Using the userattr Keyword Using Inheritance With the userattr Keyword Defining Access from a Specific IP Address Dns keyword allows wildcards. For example Defining Access from a Specific DomainDefining Access from a Specific Domain Instead, use a fully qualified name Defining Access at a Specific Time of Day or Day of Week Defining Access Based on Authentication Defining Access Based on Authentication Method Authmethod = saslmechanism Using Boolean Bind Rules Authentication bind DN and password over LdapsMethod Creating ACIs from the Console Displaying the Access Control Editor Displaying the Access Control EditorClick New to open the Access Control Editor Creating a New ACI Access Control Editor Window Creating a New ACI Managing Access Control Creating a New ACI Managing Access Control Editing an ACI Editing an ACI Viewing ACIs Deleting an ACIControl Manager Get Effective Rights Control Get Effective Rights Control PermissionsGet effective rights result looks like the following Permission Description Using Get Effective Rights from the Command-LinePermissions That Can Be Set on Entries Permissions That Can Be Set on Attributes Using Get Effective Rights from 214 Code Description Using Get Effective Rights from the ConsoleGet Effective Rights Return Codes Check the Show effective rights checkbox Logging Access Control Information Access Control Usage ExamplesReturned Result Codes Granting Anonymous Access Granting Anonymous Access ACI Anonymous World Click New to display the Access Control EditorClick OK in the Access Control Editor window ACI Anonymous example.com Granting Write Access to Personal Entries Granting Write Access to Personal EntriesFilter for subentries field, type the following filter 220 ACI Write example.com ACI Write Subscribers Restricting Access to Key Roles Restricting Access to Key Roles See , Using RolesACI Roles Granting a Group Full Access to a Suffix ACI HRLdif statement should read as follows ACI Create Group Granting Rights to Add and Delete Group Entries Managing Access Control Granting Conditional Access to a Group or Role ACI Delete GroupEntries 228 ACI HostedCompany1 Denying Access Denying AccessLdif statement should be similar to the following ACI Billing Info Read 231 ACI Billing Info Deny Allowing Users to Add or Remove Themselves from a Group Setting a Target Using Filtering Allowing Users to Add or Remove ACI Group Members Defining Permissions for DNs That Contain a Comma Proxied Authorization ACI Example Advanced Access Control Using Macro ACIs Macro ACI ExampleThemselves from a Group 236 Example Directory Tree for Macro ACIs Macro ACI Syntax Macro ACI Syntax Macro Matching for $dn Macros in ACI KeywordsMacro ACI Keyword $dn in the subject is replaced with dc=hostedCompany1 Steps for expanding this ACI are as follows Macro Matching for $attr.attrName For example, consider the following ACI240 Access Control and Replication Access Control and ReplicationCompatibility with Earlier Releases 242 Configuring the Password Policy Managing the Password Policy Managing User Accounts and Passwords Configuring a Global Password Policy Using the Console Configuring the Password Policy Check the Enable fine-grained password policy checkbox Configuring a Subtree/User Password Policy Using the Console Attribute Name Definition Configuring a Global Password Policy Using the Command-Line Directory data because the longer a password Users password will expire after an intervalGiven by the passwordMaxAge attribute Making passwords expire helps protect Session to cycle through the password history Discourage users from reusing old passwordsFor example, setting the minimum password Changing their passwords during a single Attributes, respectively. By default, this Shorter passwords are easier to crackPasswords can be two 2 to 512 characters It down. This attribute is set to 8 by default Lowercase letters a to z This attribute is set to 3 by defaultDefault method Compatibility with Unix passwords Password Policy Attributes CoS specification entry at the subtree level. For example 254 Start the server Setting User PasswordsPassword Change Extended Operation Setting User Passwords Ldappasswd Options Parameter Description256 Configuring the Account Lockout Policy Configuring the Account Lockout Policy Using the ConsoleConfiguring the Account Lockout Policy Attribute Name Definition Managing the Password Policy in a Replicated Environment Managing the Password Policy in aAccount Lockout Policy Attributes Synchronizing Passwords Replicated Environment Inactivating Users and Roles Inactivating User and Roles Using the Console Inactivating User and Roles Using the Command-LineOption Name Description DN of the user account or role to activate Activating User and Roles Using the ConsoleActivating User and Roles Using the Command-Line Activating User and Roles Using Setting Resource Limits Using the Console Setting Resource Limits Based on the Bind DN Entering a value of -1indicates no limit Click OK Setting Resource Limits Using the Command-Line 266 Replication Overview What Directory Units Are ReplicatedRead-Write and Read-Only Replicas Managing Replication Suppliers and ConsumersChangelog Replication Identity Replication Agreement Compatibility with Earlier Versions of Directory ServerReplication Agreement Single-Master Replication Replication Scenarios Multi-Master Replication Multi-Master Replication 272 Multi-Master Replication Two Masters Multi-Master Replication Four Masters Replication Cascading Replication Creating the Supplier Bind DN Entry Creating the Supplier Bind DN Entry Configuring Single-Master Replication Configuring the Read-Write Replica on Configuring the Read-Write Replica on the Supplier Server Configuring the Read-Only Replica on the Consumer Supplier Server Create the Replication Agreement Create the Replication Agreement Managing Replication Create the Replication Agreement Replication will not begin until the consumer is initialized Configuring Multi-Master Replication Configuring the Read-Write Replicas on the Supplier Servers Configuring Multi-Master Replication 287 Configuring the Read-Write Replicas on Managing Replication Supplier Servers Configuring the Read-Only Replicas on the Consumer Servers Managing Replication Setting up the Replication Agreements Setting up the Replication Agreements Managing Replication Setting up the Replication Agreements Managing Replication Setting up the Replication Agreements Replication will not begin until the consumer is initialized 297 Preventing Monopolization of the Consumer Configuring Cascading Replication Configuring the Read-Write Replica on the Supplier Server Configuring the Read-Only Replica on the Consumer Server Configuring the Read-Only Replica on Configuring the Read-Only Replica on the Hub Consumer Server Managing Replication Setting up the Replication Agreements Managing Replication DN and password Managing Replication Setting up the Replication Agreements Replication will not begin until the consumer is initialized Configuring Replication from the Command Line Configuring Suppliers from the Command LineConfiguring Replication from the Command 312 Changelog, to which Changelog AttributesLine Object Class or Attribute Description Values 314 Consumer. This is required for Replica Attributes Configuring Consumers from the Command LineConfiguring Consumers from the Command Forward update requests. By Configuring Hubs from the Command Line Configuring Replication Agreements from the Command Line Parameter to SSL. If TLS/SSL 318 Qualified host and domain Objectclass=* $ Exclude Attributes will not be Configuring Replication Agreements fromReplication between Servers Nsds5replicabindcredentials Nsds5replicatedattributelist Midnight and 2359 is PM. For example, the setting Replication Agreement Attributes320 Command Line Initializing Consumers Online from the Command Line Deleting the Changelog Making a Replica Updatable Moving the Changelog to a New Location Initializing ConsumersRemoving the Changelog Moving the Changelog to a New Location Online Consumer Initialization Using the Console When to Initialize a Consumer Initializing Consumers Online Using Initializing Consumers Online Using the Command Line Exporting a Replica to Ldif Manual Consumer Initialization Using the Command Line Importing the Ldif File to the Consumer Server Filesystem Replica Initialization Initializing the Consumer Replica from the Backup Files Restart the destination Directory Server. For example Forcing Replication UpdatesForcing Replication Updates Stop the destination Directory Server if it is running Forcing Replication Updates from the Command-Line Forcing Replication Updates from the Console Replicating Account Lockout Attributes Replicating Account Lockout AttributesExample 8.1. ReplicateNow Script Example ReplicateNow Variables Replication over SSL Select SSL Client Authentication Select Simple AuthenticationReplicating o=NetscapeRoot for Directory Server Installation Guide Administration Server Failover Replication with Earlier ReleasesSee , Enabling and Disabling Plug-ins Using the Retro Changelog Plug-in Retro Changelog Entry Enabling the Retro Changelog Plug-inAttributes of a Retro Changelog Entry Enabling the Retro Changelog Plug-in Trimming the Retro Changelog Searching and Modifying the Retro Changelog Retro Changelog and the Access Control PolicyRetro Changelog and the Access Control Monitoring Replication Status Monitoring Replication Status from Administration Express Directory Server Console Replication StatusTable Header Description Table header shows the replica ID 341 Policy Solving Common Replication Conflicts Solving Naming Conflicts Renaming an Entry with a Multi-Valued Naming AttributeSolving Naming Conflicts 344 Unique identifier attribute nsuniqueid cannot be deleted Renaming an Entry with a Single-Valued Naming Attribute Solving Orphan Entry Conflicts Solving Potential Interoperability Problems Troubleshooting Replication-Related Troubleshooting Replication-Related Problems Error/Symptom Reason Impact Remedy Problems Direct consumers But some consumers Follows Are way behind SupplierIf it has been Replayed to all Replication Status Replication ErrorsSee Section Monitoring 352 Create new attributes, as in .2, Creating Attributes Overview of Extending SchemaManaging Attributes Viewing Attributes Syntax Extending the Directory SchemaField Name Field Description Creating AttributesAttributes Tab Reference Creating Attributes Editing Attributes Deleting AttributesOIDs are described in .1, Attributes Tab Reference Managing Object Classes This procedure is explained in .4, Deleting AttributesManaging Object Classes Viewing Object Classes Reference Parent358 Creating Object Classes Object Classes Tab ReferenceCreating Object Classes Click OK to save the new object class Editing Object Classes Deleting Object Classes Deleting Object Classes Turning Schema Checking On and Off About Index Types About Indexes Attribute Pres Sub Purpose About Default, System, and Standard IndexesOverview of Default Indexes Managing Indexes Integrity for About Default, System, and StandardMaintaining Referential Default Indexes Overview of System Indexes366 Attribute Pres Purpose Overview of the Searching AlgorithmOverview of Standard Indexes System Indexes Managing Indexes Approximate Searches Balancing the Benefits of IndexingApproximate Searches Directory Server is maintaining the following indexes 370 Creating Indexes Creating Indexes Creating Indexes from the Server Console Creating Indexes from the Command-Line Creating Indexes from the Command-LineAdding an Index Entry 374 To create a new index for a particular database, add it to Creating Indexes from the Command-Line Db2index Options describes the db2index.pl options Running the db2index.pl ScriptDb2index.pl Options Run the db2index.pl Perl script Creating Browsing Indexes from Creating Browsing Indexes from the Command-LineCreating Browsing Indexes from the Server Console Adding a Browsing Index Entry Managing Indexes This first browsing index entry must be added to Running the vlvindex Script Run the vlvindex script Setting Access Control for VLV InformationVlvindex Options Stop the server.3 Change ldap//all to ldap//anyone and save your changes Deleting IndexesDeleting Indexes A text editor, open the dse.ldif file Deleting Indexes from the Server Console Deleting Indexes from the Command-Line Deleting Indexes from the Command-Line Deleting an Index EntryLdapdelete Options describes the ldapdelete options Run the db2index.pl Perl script. For example Ldapdelete Options Db2index Options Deleting Browsing Indexes from the Command-LineDeleting Browsing Indexes from the Server Console Deleting a Browsing Index Entry Option Description Vlvindex Options describes the vlvindex options Managing Indexes Search Performance Indexing Performance Backwards Compatibility and Migration Attribute Name Quick Reference Table Backwards Compatibility and MigrationAttribute Primary Name Attribute Alias Attribute Name Quick Reference Table Attribute Name Quick Reference Table391 392 Enabling SSL Summary of Steps Introduction to TLS/SSL in the Directory Server Command-Line Functions for Start TLS Managing SSLTurn on TLS/SSL in the directory Obtaining and Installing Server Certificates Troubleshooting Start TLSObtaining and Installing Server Certificates Generate a Certificate Request Generate a Certificate Request Managing SSL After generating the certificate request, send it to the CA Send the Certificate Request Install the Certificate Trust the Certificate Authority Trust the Certificate Authority Confirm That The New Certificates Are Installed Using certutil Create a password file for the security token password Creating Directory Server CertificatesGenerate the Directory Server client certificate 404 Certutil Options Starting the Server with TLS/SSL EnabledThrough the Command Line Certutil Usage Click Cipher Settings Enabling TLS/SSL Only in the Directory ServerSelect the certificate to use from the drop-down menu Enabling TLS/SSL Only in the Directory Described in , Starting and Stopping Servers Server Click Cipher Settings Check the Use SSL in the Console box. Hit Save409 Creating a Password File for the Directory Server Creating a Password File for Creating a Password File for the Administration Server Setting Security Preferences Restart the Administration ServerAvailable Ciphers TLSv1 Ciphers Administration Server Click Cipher Setting Selecting the Encryption CipherSSLv3 Ciphers Using Certificate-Based Authentication Using Certificate-Based AuthenticationEncryption tab, click Save Allowing/Requiring Client Authentication Setting up Certificate-Based Authentication Now start Red Hat Console Configuring Ldap Clients to Use SSLConfiguring Ldap Clients to Use SSL Stop the Directory Server Begin Certificate Client certificate resembles the following Configuring Ldap Clients to Use SSL Click Set Value 420 Managing Sasl Authentication Mechanisms Sasl is configured by entries under a container entry 422 Sasl Identity MappingManaging Sasl Sasl Identity Mapping Sasl identity mapping entries are children of this entry423 Configuring Sasl Identity Mapping from the Console Configuring Sasl Identity Mapping from Operating System Kerberos Version Configuring Sasl Identity Mapping from the Command-LineConfiguring Kerberos Supported Kerberos Systems Realms Configuring the KDC Server Example Configuring an Example KDC Server Configuring Sasl Authentication at Configuring Sasl Authentication at Directory Server Startup Managing Sasl Viewing and Configuring Log Files Administration ExpressDefining a Log File Rotation Policy Monitoring Server and Database Activity Defining a Log File Deletion Policy Access LogViewing the Access Log Defining a Log File Deletion Policy Display to refresh automatically every ten seconds Configuring the Access Log Error Log Viewing the Error LogError Log Configuring the Error Log Containing text box, and click RefreshClick Save 436 Audit Log Configuring the Audit LogAudit Log Viewing the Audit Log Monitoring Server Activity Manual Log File Rotation Monitoring the Server from the Directory Monitoring the Server from the Directory Server Console Resource Current Total General Information ServerResource Summary Resource Usage Since Startup Average Per Minute Operations, and therefore multiple threads Current Resource UsageServer Console Connection can account for multiple Connection Status Monitoring the Directory Server from the Command Line Global Database Cache InformationMonitoring the Directory Server from 444 Attribute Description Monitoring Database Activity Server Monitoring AttributesTime GMT in UTC format Performance Metric Current Total See , Tuning DatabaseMaximum Cache Size setting. See Section General Information Database Monitoring Database Activity from Tuning Database Performance forCache setting. See , Tuning Summary Information Monitoring Databases from the Command Line Database Cache Information10. Database File-Specific Directory Server Console Maximum Entries in Cache attribute Lower the number of page evicts the better Monitoring Database Link Activity11. Directory Server Monitoring Attributes Monitoring Database Link Activity 452 12. Database Link Monitoring Attributes About Snmp Snmp Agentx-master Configuring the Master Agent Configuring the SubagentSubagent Configuration File Monitoring Directory Server Using Snmp Starting the Subagent Starting the SubagentAgent-logdir Server Testing the Subagent Configuring Snmp Traps Configuring the Directory Server for Snmp Using the Management Information BaseConfiguring the Directory Server for Snmp Managed Object Description Operations Table Entries Table Operations Table Managed Objects and Descriptions Entries Table Entity TableEntries Table Managed Objects and Descriptions Interaction Table Entity Table Managed Objects and DescriptionsInteraction Table 462 Interaction Table Managed Objects and DescriptionsManagement subsystem was initialized, this Object will contain a value of zero Tuning Server Performance Tuning Directory Server Performance Tuning Database Performance Tuning Directory Server PerformanceOptimizing Search Performance Optimizing Search Performance Changing the Location of the Database Transaction Log Tuning Transaction Logging Changing the Database Checkpoint Interval Changing the Database Checkpoint Interval Miscellaneous Tuning Tips Disabling Durable TransactionsSpecifying Transaction Batching Avoid Creating Entries Under the cn=config 470 Details of 7-Bit Check Plug-in Server Plug-in Functionality ReferenceBit Check Plug-in ACL Plug-in Details of ACI Plug-in Administering Directory Server Plug-insACL Preoperation Plug-in Binary Syntax Plug-in Details of Boolean Syntax Plug-in Boolean Syntax Plug-inCase Exact String Syntax Plug-in Details of Binary Syntax Plug-in Details of Case Ignore String Syntax Plug-in Case Ignore String Syntax Plug-inChaining Database Plug-in Details of Case Exact String Syntax Plug-in Country String Syntax Plug-in Class of Service Plug-inDetails of Class of Service Plug-in Class of Service Plug-in 11. Details of Distinguished Name Syntax Plug-in Distinguished Name Syntax Plug-inGeneralized Time Syntax Plug-in 10. Details of Country String Plug-in 13. Details of Integer Syntax Plug-in Integer Syntax Plug-inInternationalization Plug-in 12. Details of Generalized Time Syntax Plug-in 15. Details of ldbm Database Plug-in Ldbm Database Plug-inLegacy Replication Plug-in 14. Details of Internationalization Plug-in 17. Details of Multi-Master Replication Plug-in Multi-Master Replication Plug-inOctet String Syntax Plug-in 16. Details of Legacy Replication Plug-in 18. Details of Octet String Syntax Plug-in Clear Password Storage Plug-inCrypt Password Storage Plug-in 19. Details of Clear Password Storage Plug-in NS-MTA-MD5 Password Storage Plug-in NS-MTA-MD5 Password Storage Plug-in20. Details of Crypt Password Storage Plug-in 21. Details of NS-MTA-MD5 Password Storage Plug-in SHA Password Storage Plug-in Ssha Password Storage Plug-in22. Details of SHA Password Storage Plug-in 24. Details of Postal Address String Syntax Plug-in 23. Details of Ssha Password Storage Plug-inPostal Address String Syntax Plug-in PTA Plug-in Referential Integrity Postoperation Plug-in Using the Pass-throughAuthentication Plug-in See , Using the Pass-through See , Managing Indexes for Retro Changelog Plug-in26. Details of Referential Integrity Post-Operation Plug-in Retro Changelog Plug-in 28. Details of Roles Plug-in Roles Plug-inSpace Insensitive String Syntax Plug-in 27. Details of Retro Changelog Plug-in See Appendix B, Finding Directory Entries State Change Plug-in29. Details of Space Insensitive String Syntax Plug-in State Change Plug-in 31. Details of Telephone Syntax Plug-in Telephone Syntax Plug-inUID Uniqueness Plug-in 30. Details of State Change Plug-in URI Plug-in See , Using the AttributeURI Plug-in 32. Details of UID Uniqueness Plug-in 33. Details of URI Plug-in Enabling and Disabling Plug-ins How Directory Server Uses PTA Using the Pass-through Authentication Plug-in PTA Plug-in Syntax Using the Pass-through Authentication Plug-in Variable Definition PTA Plug-in Syntax Configuring the Optional Parameters for See .5, Configuring the OptionalSpecifying the Pass-through Subtree for Configuring the PTA Plug-in Configuring the PTA Plug-inPTA Plug-in Parameters Configuring the Servers to Use a Secure Connection Specifying the Authenticating Directory ServerTurning the Plug-in On or Off Specifying the Pass-through Subtree Specifying the Pass-through Subtree Configuring the Optional Parameters PTA Plug-in Syntax Examples PTA Plug-in Syntax Examples Using Non-Default Parameter Values Specifying Multiple Authenticating Directory Servers Specifying Different Optional Parameters 502 Overview of the Attribute Uniqueness Plug-in Using the Attribute Uniqueness Plug-in Attribute Uniqueness Plug-in Syntax Using the Attribute Uniqueness Plug-in Attribute Uniqueness Plug-in Syntax See .3.1, Turning the Plug-in On or505 Attribute Uniqueness Plug-in Variables Creating an Instance of the Attribute Uniqueness Plug-in Configuring Attribute Uniqueness Plug-ins Viewing Plug-in Configuration InformationConfiguring Attribute Uniqueness Plug-ins From the Property Editor From the Configuration tab Turning the Plug-in On or Off Specifying a Suffix or Subtree509 Using the markerObjectClass and requiredObjectClass Keywords Specifying One Attribute and Multiple Subtrees From the Command-LineAttribute Uniqueness Plug-in Syntax Examples Specifying One Attribute and One Subtree Simple Replication Scenario Replication and the Attribute Uniqueness Plug-in Multi-Master Replication Scenario Multi-Master Replication Scenario 514 About Windows Sync Active Directory Directory Server Synchronization Process 517 About Windows Sync Configure SSL on Directory Server Configuring Windows Sync Configure the Active Directory Domain Configure the Active DirectorySelect the Enterprise Root CA option Iv. Accept the certificate request. For example Select or Create the Sync Identity Domain Install and Configure the Password Sync Service Reboot the Windows machine to start Password Sync Hit Next, then Finish to install Password Sync 523 Install and Configure the Password Give trusted peer status to the server Configure the Directory Server Database for Synchronization Create the Synchronization Agreement Sync Service Setting up the Sync Agreement Synchronizing Users Synchronizing Groups Deleting Entries Using Windows SyncBegin Synchronization Begin Synchronization Synchronizing Users Synchronizing Users Directory Server Active Directory529 PhysicalDeliveryOfficeName Synchronizing Groups Description Member SeeAlso Deleting EntriesDeleting Entries NtGroupAttributes NtGroupId Name SamAccountName NtGroupType Manually Updating and Resynchronizing Entries Resurrecting Entries Checking Synchronization Status Modifying the Sync AgreementChecking Synchronization Status Values for street and streetAddress Schema DifferencesPassword Policies Groups Contraints on the initials attribute Password Sync ServiceModifying Password Sync Starting and Stopping the Password Sync Service Open the Add/Remove Programs utility TroubleshootingUninstalling Password Sync Service To uninstall the Password Sync service, do the following 537 Troubleshooting 538 About the Ldif File Format Appendix A. Ldap Data Interchange Format Field Definition Continuing Lines in LdifTable A.1. Ldif Fields Appendix A. Ldap Data Interchange Format Representing Binary Data Representing Binary DataStandard Ldif Notation Base-64 Encoding Specifying Domain Entries Specifying Directory Entries Using Ldif Ldif Element Description Table A.2. Ldif Elements in Domain EntriesSpecifying Organizational Unit Entries Domain Entries Specifying Organizational Unit Entries Specifying Organizational Person Entries Table A.3. Ldif Elements in Organizational Unit EntriesSpecifying Organizational Person Entries Table A.4. Ldif Elements in Person Entries Defining Directories Using Ldif 547 Defining Directories Using Ldif Ldif File Example Storing Information in Multiple Languages Storing Information in Multiple Languages 550 File contents are then converted to UTF-8 Figure B.1. Browsing Entries in the Directory Tab Finding Entries Using the Directory Server Console Appendix B. Finding Directory Entries Using ldapsearch Ldapsearch command must use the following format Ldapsearch Command-Line Format Commonly Used ldapsearch Options Commonly Used ldapsearch Options Returning All Entries Ldapsearch Examples Searching the Root DSE Entry Specifying Search Filters on the Command LineSearching the Schema Entry Using Ldapbasedn Specifying Search Filters Using a File Displaying Subsets of AttributesThis example assumes the search base is set with Ldapbasedn Ldap Search Filters Using Client Authentication When SearchingLdap Search Filters Specifying DNs That Contain Commas in Search Filters Basic syntax of a search filter is Using Attributes in Search FiltersUsing Operators in Search Filters Search Filter Syntax Search Type Operator Description Using Compound Search FiltersTable B.1. Search Filter Operators Search Filter Syntax Operator Symbol Description Search Filter ExamplesTable B.2. Search Filter Boolean Operators Searching an Internationalized Directory Searching an Internationalized Directory Matching Rule Formats Matching Rule Filter Syntax 565 Using an OID for the Matching RuleUsing a Language Tag for the Matching Rule Matching Rule Filter Syntax Table B.3, Search Types, Operators, and Suffixes Using Wildcards in Matching Rule FiltersUsing an OID and Suffix for the Matching Rule Using a Language Tag and Suffix for the Matching Rule Supported Search Types Supported Search TypesSearch Type Operator Suffix Equality Example International Search ExamplesLess-Than Example Less-Than or Equal-to Example International Search Examples Greater-Than or Equal-to ExampleGreater-Than Example Substring Example 570 But either one of these will work correctly Hostname Port Components of an Ldap URLLdap URLs have the following syntax Component Table C.1. Ldap URL Components Appendix C. Ldap URLsComponent Description Unsafe Character Escape Characters Escaping Unsafe CharactersExamples of Ldap URLs Escaping Unsafe Characters Example 575 Examples of Ldap URLs 576 About Locales Appendix D. Internationalization Identifying Supported Locales Appendix D. InternationalizationLocale Language Tag Collation Order Object Identifiers OIDs Table D.1. Supported Locales Supported Language Subtypes579 Supported Language Subtypes Troubleshooting Matching Rules Troubleshooting Matching RulesTable D.2. Supported Language Subtypes 582 See Also access control instruction See Also access control listSee Also ID list scan limit See bind DN GlossaryValue See base DN See Certificate Authority See Also virtual list view index See Also template entry Directory Access Protocol. The ISO X.500 standard protocolThat provides client access to the directory See Ldap client See Directory Manager See CoS definition entrySee directory tree See distinguished name See Directory Server Gateway See Also cascading replication See Ldap Data Interchange Format See Snmp master agent See supplier Directory tree Between Snmp devices. Also protocol data unit See Also access rightsSee object identifier Encoded messages which form the basis of data exchanges Receives to the authenticating directory server Authenticating directory server, pass-through subtrees,Name. Also relative distinguished name Comments on the technologies before they become accepted Request for Comments. Procedures or standards documentsProcess is called a referral Submitted to the Internet community. People can send Directory Server during installation Server Instance Entry. The ID assigned to an instanceSee supplier-initiated replication Simple Network Management Protocol SubagentSee Snmp subagent See CoS template entry Protocol. Also Transport Layer SecuritySee Also browsing index Page 600 Index Index Page Index Page Index Ldapbasedn Index Ldif Index MIB Index Page Index Page MIB Page Index