Matching Rule Filter Syntax | HP UX Red Hat Direry Server Software

Appendix B. Finding Directory Entries

NOTE

An LDAPv3 search is required to perform internationalized searches. Therefore, do not specify the -V2option on the call for ldapsearch.

This section focuses on the matching rule filter portion of the ldapsearch syntax. For more information on general ldapsearch syntax, see Section 3, “LDAP Search Filters”. For information on searching internationalized directories using the Users and Groups portion of the Red Hat Console, see the online help.

This section covers the following topics:

•Section 4.1, “Matching Rule Filter Syntax”

•Section 4.2, “Supported Search Types”

•Section 4.3, “International Search Examples”

4.1. Matching Rule Filter Syntax

A matching rule provides special guidelines for how the directory compares strings during a search operation. In an international search, the matching rule tells the system what collation order and operator to use when performing the search operation. For example, a matching rule in an international search might tell the server to search for attribute values that come at or after llama in the Spanish collation order. The syntax of the matching rule filter is as follows:

attr:matchingRule:=value

•attr is an attribute belonging to entries being searched, such as cn or mail.

•matchingRule is a string that identifies either the collation order or the collation order and a relational operator, depending on the preferred format. For a discussion of matching rule formats, see Section 4.1.1, “Matching Rule Formats”.

•value is either the attribute value to search for or a relational operator plus the attribute value to search for. The syntax of the value portion of the filter depends on the matching rule format used.

4.1.1. Matching Rule Formats

The matching rule portion of a search filter can be represented in any several ways, and which one should be used is a matter of preference:

564

Image 584

HP UX Red Hat Direry Server Software manual Matching Rule Filter Syntax, Matching Rule Formats

Contents

Administrators Guide Red Hat Directory Server Red Hat Directory Server 8.0 Administrators Guide Copyright 2008 Red Hat, Inc Red Hat Directory Server General Red Hat Directory Server Usage Creating and Maintaining Suffixes Creating and Maintaining DatabasesCreating and Maintaining Database Links Creating a New Database LinkPage Red Hat Directory Server Page Red Hat Directory Server Page Red Hat Directory Server Page Red Hat Directory Server Page Xvi Directory Server Overview Preface Example and Default References When shown as below, it indicates computer outputDocument Conventions Preface Document Conventions Xix Related Information Directory Server File Locations Chapter File or Directory Location Red Hat Enterprise Linux 4 and 5General Red Hat Directory Server Usage Sun Solaris 9 sparc HP-UX 11i IA64Ldap Tool Locations Binaries Ldap Tool Locations Starting and Stopping ServersPlatform Directory Location Opt/dirsrv/bin Start the Directory Server Console Starting and Stopping Directory Server from the ConsoleStarting and Stopping Directory Server from Starting and Stopping Administration Server Solaris uses /etc/init.d On Solaris, the service is init.d Starting the Directory Server ConsoleConsole HP-UX has a different location for the script Changing Login Identity Login screenLogging into Directory Server Click Log on to the Directory Server as a New User Viewing the Current Console Bind DN Changing Directory Server Port NumbersViewing the Current Console Bind DN General Red Hat Directory Server Usage Open the Administration Server Console Configuration tab, select the Configuration DS tabCreating a New Directory Server Instance Creating a New Directory Server Instance Configuring the Directory Manager Configuring the Directory Manager Page Managing Entries from the Directory Console Creating a Root Entry Directory Server Console, select the Configuration tab Creating Directory EntriesCreating Directory Entries Template Object Class Creating an Entry Using a Predefined Template Role NsRoleDefinition Class of Service CosSuperDefinitionCreating Other Types of Entries Entry Templates and Corresponding Object Classes Modifying Directory Entries Displaying the Property Editor Adding an Object Class to an Entry Removing an Object ClassAdding an Attribute to an Entry Modifying Directory Entries Adding Very Large Attributes Adding Attribute Values Removing an Attribute Value Adding an Attribute Subtype Language SubtypeBinary Subtype Instead, use Deleting Directory Entries Pronunciation SubtypeAdding a Subtype to an Attribute Deleting Directory Entries Entries, use Ctrl or Shift Select Delete from the Edit menu Managing Entries from the Command-LineProviding Input from the Command-Line Creating a Root Entry from Creating a Root Entry from the Command-LineSee , Ldif Update Statements Import the Ldif file from the Directory Server Console Adding Entries Using LdifAdding and Modifying Entries Using ldapmodify Parameter Name Description Adding Entries Using ldapmodifyCommand-Line Ldapmodify Parameters Used for Adding Entries Modifying Entries Using ldapmodifyInput from the Command-Line Deleting Entries Using ldapdelete Deleting Entries Using ldapdeleteLdapmodify Parameters Used for Modifying Entries Hostname is cyclops Server uses port number Are branch points in the directory tree This ldapdelete example has the following values Using Special Characters Using Special CharactersTracking Modifications to Directory Entries Ldapdelete Parameters Used for Deleting Entries Open the Tasks tab, and click Restart Directory Server Ldif Update StatementsSelect the Track Entry Modification Times checkbox Ldif Update Statements General format of Ldif update statements is as follows Adding an Entry Using Ldif Following sections describe the change types in detail Following command renames Sue Jacobs to Susan Jacobs Renaming an Entry Using LdifRenaming an Entry Using Ldif Modifying an Entry Using Ldif Addattribute Following example adds two telephone numbers to the entry Adding Attributes to Existing Entries Using LdifModifying an Entry Using Ldif Changing an Attribute Value Using Ldif Entry is now as follows Deleting All Values of an Attribute Using LdifDeleting a Specific Attribute Value Using Ldif Deleting an Entry Using Ldif Barneys entry then becomes Maintaining Referential Integrity Modifying an Entry in an Internationalized DirectoryHow Referential Integrity Works Modifying an Entry in an Internationalized Using Referential Integrity with Replication Modifying the Update Interval You can enable or disable referential integrity as followsEnabling/Disabling Referential Integrity Directory Modifying the Attribute List TIP Modifying the Attribute ListPage Creating and Maintaining Suffixes A Sample Directory Tree with One Root Suffix Creating Suffixes Configuring Directory DatabasesCreating Suffixes 1, Using Referrals in a Suffix A Sample Directory Tree with a Sub Suffix Creating Suffixes Creating a New Root Suffix Using the Console Creating a New Sub Suffix Using the Console Creating Root and Sub Suffixes from the Command-Line Attribute Name Value Creating and Maintaining Database Links for Attribute. See , CreatingMaintaining Databases for more information Creating and Maintaining Databases for Suffix Attributes Using Referrals in a SuffixMaintaining Suffixes Enabling Referrals Only During Update Operations Disabling a SuffixMaintaining Suffixes To requests from client applications Click Save Deleting a Suffix Creating and Maintaining DatabasesCreating Databases Creating Databases Configuring Directory Databases Adding Multiple Databases for a Single Suffix For example, add a new database to the server example1 Configuring Directory Databases Maintaining Directory Databases Placing a Database in Read-Only ModeMaintaining Directory Databases Making a Database Read-Only Using the Console Making a Database Read-Only from the Command LineSelect the database is read-only checkbox Change the read-only attribute to on Placing the Entire Directory Server in Read-Only Mode Deleting a DatabaseSelect the Make Entire Server Read-Only checkbox Click Save, and then restart the server Configuring Transaction Logs for Frequent Database Updates Database Encryption Encryption Keys Database Encryption Select the Attribute Encryption tab Configuring Database Encryption from the ConsoleEncryption Ciphers Exporting and Importing an Encrypted Database Configuring Database Encryption Using the Command-LineRun the ldapmodify command1 See .3, Importing from the Command-Linefor more information Configuring the Chaining Policy Creating and Maintaining Database LinksChaining Component Operations Creating and Maintaining Database Links Component Name Description Permissions NsActiveChainingComponents Cn=resource Configuring the Chaining Policy NsActiveChainingComponents Cn=certificate-based Chaining Component Operations Using the Console Components Allowed to Chain Plug-in Chaining Component Operations from the Command-LineChaining Ldap Controls Chaining Ldap Controls Using the Console Chaining Ldap Controls from the Command-Line Creating a New Database Link Using the Console Creating a New Database LinkLdap Controls and Their OIDs Creating a New Database Link Configuring Directory Databases Creating a Database Link from the Command-Line Specify the configuration information for the database link Providing Suffix Information Providing Bind Credentials NsMultiplexorBindDN cannot be that of the Directory Manager Providing an Ldap URL Summary of Database Link Configuration Attributes Providing a List of Failover ServersFile Attributes Value 1, Chaining Component Operations Attributes Value Run ldapmodify1 to add a database link to server a Create an administrative user on server B, as follows Chaining Using SSL Updating Remote Server Authentication InformationEnable SSL on the server that contains the database link Maintaining Database Links Deleting Database Links Database Links and Access Control EvaluationDatabase Links and Access Control Configuring Directory Databases Advanced Feature Tuning Database Link Performance Managing Connections to the Remote Server Using the ConsoleManaging Connections to the Remote Server Evaluation Attribute Name Description Database Link Connection Management Attributes Detecting Errors During Normal ProcessingAdvanced Feature Tuning Database Link Database Link Processing Error Detection Parameters Managing Threaded Operations Performance Advanced Feature Configuring Cascading ChainingOverview of Cascading Chaining Configuring Directory Databases Configuring Cascading Chaining Defaults Using the Console Advanced Feature Configuring Cascading Configuring Cascading Chaining Using the Console Configuring Cascading Chaining from the Command-Line Chaining Configuring Directory Databases Attribute Description Summary of Cascading Chaining Configuration AttributesDetecting Loops Aci This attribute must contain the following ACI Cascading Chaining Configuration ExampleCascading Chaining Configuration Attributes Configuring Server One 101 Configuring Server Two 102 103 Configuring Directory Databases Configuring Server Three Allow this Client on server two Using ReferralsStarting the Server in Referral Mode Setting Default Referrals Setting a Default Referral Using the ConsoleSetting a Default Referral from the Command-Line Setting Default Referrals Creating Smart Referrals Using the Directory Server Console Creating Smart Referrals 109 Creating Smart Referrals from the Command LineCreating Smart Referrals Creating Suffix Referrals Using the Console Creating Suffix Referrals Creating Suffix Referrals from the Command-Line Creating Suffix Referrals Configuring Directory Databases Action Import Initialize Database Importing DataImport Method Comparison Following sections describe importing data Importing a Database from the ConsolePopulating Directory Databases Initializing a Database from the Console Initializing a Database from the Console Importing from the Command-Line Importing Using the ldif2db Command-Line Script Importing from the Command-Line Option Description Run the ldif2db script Importing Using the ldif2db.pl Perl ScriptLdif2db Parameters Importing Using the ldif2ldap Command-Line Script Run the ldif2ldap command-line scriptExporting Data Ldif2db Options Splitting a Database Contents into Two Databases Exporting Directory Data to Ldif Using the Console Exporting Directory Data to Ldif Using Exporting a Single Database to Ldif Using the Console Exporting to Ldif from the Command-Line Run the db2ldif command-line script Ldif file in this case would beDirectory and is automatically named With the -noption or 123 Backing up and Restoring Data Backing up All DatabasesBacking up All Databases from the Server Console Db2ldif Options Backing up All Databases from the Command-Line Run the db2bak command-line scriptBacking up All Databases Click Back Up Directory Server Backing up the dse.ldif Configuration File Click Restore Directory ServerRestore Directory dialog box is displayed 126 Restoring All Databases Restoring Your Database from the Command-Line Using the bak2db Command-Line ScriptUsing bak2db.pl Perl Script Restoring All Databases Restart the Directory Server Restoring a Single DatabaseRun the bak2db.pl Perl script Restoring Databases That Include Restoring the dse.ldif Configuration FileRestoring Databases That Include Replicated Entries 130 Using Roles About Roles Managing Entries with Roles, Class of Service, and Views Managing Roles Using the Console Managing Roles Using the Console Creating a Managed Role 134 135 Creating a Filtered RoleFollow the steps of .2.1, Creating a Managed Role Creating a Nested Role Viewing and Editing an Entrys RolesCreate a new role, as in .2.1, Creating a Managed Role 136 137 Modifying a Role EntryMaking a Role Inactive Reactivating a Role Deleting a Role Managing Roles Using the Command-Line Managing Roles Using the Command-LineObject Classes and Attributes for Roles Dialog box appears to confirm the deletion. Click Yes Examples Managed Role Definition Example Filtered Role Definition 141 Using Roles Securely Example Nested Role Definition Assigning Class of Service Assigning Class of Service About CoS About the CoS Definition Entry About CoS About the CoS Template EntryHow a Pointer CoS Works How an Indirect CoS Works Sample Pointer CoS How a Classic CoS Works Sample Indirect CoS Searches for CoS-Specified Attributes Sample Classic CoS Creating a New CoS Managing CoS Using the ConsoleManaging CoS Using the Console 150 Creating the CoS Template Entry Property Editor opens Editing an Existing CoS Deleting a CoS Managing CoS from the Command-Line Creating the CoS Definition Entry from the Command-LineManaging CoS from the Command-Line CoS Type Object Classes Description Attribute Definition CoS Definition Entry Object ClassesCoS Definition Entry Attributes Managing CoS from the Command-Line CoS Definitions CoS Type CoS definitionPointer CoS Indirect CoS Creating the CoS Template Entry from the Command-Line Be added to any other search filter using or Example of a Pointer CoS 158 Example of an Indirect CoS Create the template entry Example of a Classic CoS Classic CoS definition entry looks like Creating Role-Based AttributesCreating Role-Based Attributes Using Views Access Control and CoS Creating Views in the Console Creating Views in the Console Creating Views from the Command Line Deleting Views from the Directory Server Console Using Groups Deleting Views from the Command LineDeleting Views from the Command Line Managing Static Groups Adding a New Static Group Modifying a Static Group Managing Dynamic Groups Adding a New Dynamic GroupModifying a Dynamic Group Managing Dynamic Groups 168 Access Control Principles ACI Structure ACI Placement Managing Access ControlACI Evaluation ACI Limitations Default ACIs Default ACIs Creating ACIs Manually ACI Syntax Defining TargetsDefining Targets Aci attribute uses the following syntax Ldif Target Keywords Keyword Valid Expressions Wildcard AllowedTargetattr Targetfilter Targeting a Directory Entry 175 Targeting Attributes Targeting Both an Entry and Attributes 177 Targeting Entries or Attributes Using Ldap Filters 178 Targeting Attribute Values Using Ldap Filters Defining Permissions Targeting a Single Directory Entry Allowing or Denying Access Assigning RightsDefining Permissions Assigning rights Rights Required for Ldap Operations User RightsSelfwrite to the targeted entry, excluding Proxy rights 183 Permissions Syntax Access Control and the modrdn OperationBind Rules Bind Rule Syntax Bind Rule SyntaxUserdn Yes, in DN only Defining User Access userdn Keyword Ldif Bind Rule KeywordsGroupdn Ldap///DN DN Roledn Userattr Dns Anonymous Access anyone Keyword General Access all KeywordSelf Access self Keyword Parent Access parent Keyword ScenExamplerio Description WildcardsExamples Defining Group Access groupdn Keyword Userdn Keyword Examples Groupdn Examples Defining Group Access groupdn KeywordDefining Role Access roledn Keyword Defining Access Based on Value Matching Defining Access Based on Value MatchingUsing the userattr Keyword AttrValue is any string representing an attribute value Example with Userdn Bind TypeExample with Groupdn Bind Type 193 Example with Roledn Bind TypeExample with Ldapurl Bind Type Using the userattr Keyword with Inheritance Example with Any Attribute Value Using Inheritance With the userattr Keyword Granting Add Permission Using the userattr Keyword Defining Access from a Specific IP Address Defining Access from a Specific Domain Defining Access from a Specific DomainInstead, use a fully qualified name Dns keyword allows wildcards. For example Defining Access at a Specific Time of Day or Day of Week Defining Access Based on Authentication Method Defining Access Based on Authentication Authmethod = saslmechanism Method Using Boolean Bind RulesAuthentication bind DN and password over Ldaps Creating ACIs from the Console Click New to open the Access Control Editor Displaying the Access Control EditorDisplaying the Access Control Editor Access Control Editor Window Creating a New ACI Creating a New ACI Managing Access Control Creating a New ACI Managing Access Control Editing an ACI Editing an ACI Control Manager Viewing ACIsDeleting an ACI Get effective rights result looks like the following Get Effective Rights ControlGet Effective Rights Control Permissions Using Get Effective Rights from the Command-Line Permissions That Can Be Set on EntriesPermissions That Can Be Set on Attributes Permission Description Using Get Effective Rights from 214 Using Get Effective Rights from the Console Get Effective Rights Return CodesCheck the Show effective rights checkbox Code Description Returned Result Codes Logging Access Control InformationAccess Control Usage Examples Granting Anonymous Access Granting Anonymous Access Click New to display the Access Control Editor Click OK in the Access Control Editor windowACI Anonymous example.com ACI Anonymous World Filter for subentries field, type the following filter Granting Write Access to Personal EntriesGranting Write Access to Personal Entries ACI Write example.com 220 ACI Write Subscribers Restricting Access to Key Roles ACI Roles Restricting Access to Key RolesSee , Using Roles Ldif statement should read as follows Granting a Group Full Access to a SuffixACI HR Granting Rights to Add and Delete Group Entries ACI Create Group Managing Access Control Entries Granting Conditional Access to a Group or RoleACI Delete Group ACI HostedCompany1 228 Ldif statement should be similar to the following Denying AccessDenying Access ACI Billing Info Read ACI Billing Info Deny 231 Setting a Target Using Filtering Allowing Users to Add or Remove Themselves from a Group ACI Group Members Allowing Users to Add or Remove Proxied Authorization ACI Example Defining Permissions for DNs That Contain a Comma Themselves from a Group Advanced Access Control Using Macro ACIsMacro ACI Example Example Directory Tree for Macro ACIs 236 Macro ACI Syntax Macro ACI Syntax Macro ACI Keyword Macro Matching for $dnMacros in ACI Keywords Steps for expanding this ACI are as follows $dn in the subject is replaced with dc=hostedCompany1 240 Macro Matching for $attr.attrNameFor example, consider the following ACI Compatibility with Earlier Releases Access Control and ReplicationAccess Control and Replication 242 Managing the Password Policy Configuring the Password Policy Configuring a Global Password Policy Using the Console Managing User Accounts and Passwords Configuring the Password Policy Configuring a Subtree/User Password Policy Using the Console Check the Enable fine-grained password policy checkbox Configuring a Global Password Policy Using the Command-Line Attribute Name Definition Users password will expire after an interval Given by the passwordMaxAge attributeMaking passwords expire helps protect Directory data because the longer a password Discourage users from reusing old passwords For example, setting the minimum passwordChanging their passwords during a single Session to cycle through the password history Shorter passwords are easier to crack Passwords can be two 2 to 512 charactersIt down. This attribute is set to 8 by default Attributes, respectively. By default, this This attribute is set to 3 by default Default methodCompatibility with Unix passwords Lowercase letters a to z Password Policy Attributes CoS specification entry at the subtree level. For example 254 Setting User Passwords Password Change Extended OperationSetting User Passwords Start the server 256 Ldappasswd OptionsParameter Description Configuring the Account Lockout Policy Configuring the Account Lockout PolicyConfiguring the Account Lockout Policy Using the Console Attribute Name Definition Account Lockout Policy Attributes Managing the Password Policy in a Replicated EnvironmentManaging the Password Policy in a Synchronizing Passwords Inactivating Users and Roles Replicated Environment Option Name Description Inactivating User and Roles Using the ConsoleInactivating User and Roles Using the Command-Line Activating User and Roles Using the Console Activating User and Roles Using the Command-LineActivating User and Roles Using DN of the user account or role to activate Setting Resource Limits Based on the Bind DN Setting Resource Limits Using the Console Setting Resource Limits Using the Command-Line Entering a value of -1indicates no limit Click OK 266 Read-Write and Read-Only Replicas Replication OverviewWhat Directory Units Are Replicated Suppliers and Consumers ChangelogReplication Identity Managing Replication Replication Agreement Replication AgreementCompatibility with Earlier Versions of Directory Server Replication Scenarios Single-Master Replication Multi-Master Replication Multi-Master Replication Multi-Master Replication Two Masters 272 Multi-Master Replication Four Masters Cascading Replication Replication Creating the Supplier Bind DN Entry Creating the Supplier Bind DN Entry Configuring Single-Master Replication Configuring the Read-Write Replica on the Supplier Server Configuring the Read-Write Replica on Configuring the Read-Only Replica on the Consumer Supplier Server Create the Replication Agreement Create the Replication Agreement Managing Replication Create the Replication Agreement Replication will not begin until the consumer is initialized Configuring Multi-Master Replication Configuring Multi-Master Replication Configuring the Read-Write Replicas on the Supplier Servers Configuring the Read-Write Replicas on 287 Managing Replication Configuring the Read-Only Replicas on the Consumer Servers Supplier Servers Managing Replication Setting up the Replication Agreements Setting up the Replication Agreements Managing Replication Setting up the Replication Agreements Managing Replication Setting up the Replication Agreements Replication will not begin until the consumer is initialized Preventing Monopolization of the Consumer 297 Configuring Cascading Replication Configuring the Read-Write Replica on the Supplier Server Configuring the Read-Only Replica on the Consumer Server Configuring the Read-Only Replica on Configuring the Read-Only Replica on the Hub Consumer Server Managing Replication Setting up the Replication Agreements Managing Replication DN and password Managing Replication Setting up the Replication Agreements Replication will not begin until the consumer is initialized Configuring Replication from the Command Configuring Replication from the Command LineConfiguring Suppliers from the Command Line 312 Changelog Attributes LineObject Class or Attribute Description Values Changelog, to which Consumer. This is required for 314 Configuring Consumers from the Command Line Configuring Consumers from the CommandForward update requests. By Replica Attributes Configuring Hubs from the Command Line Configuring Replication Agreements from the Command Line Qualified host and domain Parameter to SSL. If TLS/SSL 318 Configuring Replication Agreements from Replication between Servers Nsds5replicabindcredentialsNsds5replicatedattributelist Objectclass=* $ Exclude Attributes will not be 320 Midnight and 2359 is PM. For example, the settingReplication Agreement Attributes Initializing Consumers Online from the Command Line Command Line Making a Replica Updatable Deleting the Changelog Initializing Consumers Removing the ChangelogMoving the Changelog to a New Location Moving the Changelog to a New Location When to Initialize a Consumer Online Consumer Initialization Using the Console Initializing Consumers Online Using the Command Line Initializing Consumers Online Using Manual Consumer Initialization Using the Command Line Exporting a Replica to Ldif Filesystem Replica Initialization Importing the Ldif File to the Consumer Server Initializing the Consumer Replica from the Backup Files Forcing Replication Updates Forcing Replication UpdatesStop the destination Directory Server if it is running Restart the destination Directory Server. For example Forcing Replication Updates from the Console Forcing Replication Updates from the Command-Line Replicating Account Lockout Attributes Example 8.1. ReplicateNow Script ExampleReplicateNow Variables Replicating Account Lockout Attributes Replication over SSL Replicating o=NetscapeRoot for Select SSL Client AuthenticationSelect Simple Authentication Directory Server Installation Guide See , Enabling and Disabling Plug-ins Administration Server FailoverReplication with Earlier Releases Using the Retro Changelog Plug-in Enabling the Retro Changelog Plug-in Attributes of a Retro Changelog EntryEnabling the Retro Changelog Plug-in Retro Changelog Entry Trimming the Retro Changelog Retro Changelog and the Access Control Policy Retro Changelog and the Access ControlMonitoring Replication Status Searching and Modifying the Retro Changelog Table Header Description Monitoring Replication Status from Administration ExpressDirectory Server Console Replication Status Policy Table header shows the replica ID 341 Solving Common Replication Conflicts Solving Naming Conflicts Solving Naming ConflictsRenaming an Entry with a Multi-Valued Naming Attribute Unique identifier attribute nsuniqueid cannot be deleted 344 Renaming an Entry with a Single-Valued Naming Attribute Solving Potential Interoperability Problems Solving Orphan Entry Conflicts Troubleshooting Replication-Related Problems Troubleshooting Replication-Related Error/Symptom Reason Impact Remedy Problems But some consumers Follows Are way behind Supplier If it has beenReplayed to all Direct consumers Replication Errors See SectionMonitoring Replication Status 352 Overview of Extending Schema Managing AttributesViewing Attributes Create new attributes, as in .2, Creating Attributes Extending the Directory Schema FieldName Syntax Creating Attributes Attributes Tab ReferenceCreating Attributes Field Description OIDs are described in .1, Attributes Tab Reference Editing AttributesDeleting Attributes This procedure is explained in .4, Deleting Attributes Managing Object ClassesViewing Object Classes Managing Object Classes 358 ReferenceParent Creating Object Classes Creating Object ClassesObject Classes Tab Reference Editing Object Classes Click OK to save the new object class Deleting Object Classes Deleting Object Classes Turning Schema Checking On and Off About Indexes About Index Types About Default, System, and Standard Indexes Overview of Default IndexesManaging Indexes Attribute Pres Sub Purpose About Default, System, and Standard MaintainingReferential Integrity for 366 Default IndexesOverview of System Indexes Overview of the Searching Algorithm Overview of Standard IndexesSystem Indexes Attribute Pres Purpose Managing Indexes Approximate Searches Approximate SearchesBalancing the Benefits of Indexing Directory Server is maintaining the following indexes 370 Creating Indexes Creating Indexes Creating Indexes from the Server Console Adding an Index Entry Creating Indexes from the Command-LineCreating Indexes from the Command-Line To create a new index for a particular database, add it to 374 Creating Indexes from the Command-Line Running the db2index.pl Script Db2index.pl OptionsRun the db2index.pl Perl script Db2index Options describes the db2index.pl options Creating Browsing Indexes from the Command-Line Creating Browsing Indexes from the Server ConsoleAdding a Browsing Index Entry Creating Browsing Indexes from Managing Indexes Running the vlvindex Script This first browsing index entry must be added to Setting Access Control for VLV Information Vlvindex OptionsStop the server.3 Run the vlvindex script Deleting Indexes Deleting IndexesA text editor, open the dse.ldif file Change ldap//all to ldap//anyone and save your changes Deleting Indexes from the Command-Line Deleting Indexes from the Server Console Ldapdelete Options describes the ldapdelete options Deleting Indexes from the Command-LineDeleting an Index Entry Ldapdelete Options Run the db2index.pl Perl script. For example Deleting Browsing Indexes from the Command-Line Deleting Browsing Indexes from the Server ConsoleDeleting a Browsing Index Entry Db2index Options Option Description Managing Indexes Vlvindex Options describes the vlvindex options Indexing Performance Search Performance Backwards Compatibility and Migration Attribute Primary Name Attribute Alias Attribute Name Quick Reference TableBackwards Compatibility and Migration 391 Attribute Name Quick Reference TableAttribute Name Quick Reference Table 392 Introduction to TLS/SSL in the Directory Server Enabling SSL Summary of Steps Turn on TLS/SSL in the directory Command-Line Functions for Start TLSManaging SSL Obtaining and Installing Server Certificates Obtaining and Installing Server CertificatesTroubleshooting Start TLS Generate a Certificate Request Generate a Certificate Request Managing SSL Send the Certificate Request After generating the certificate request, send it to the CA Install the Certificate Trust the Certificate Authority Trust the Certificate Authority Using certutil Confirm That The New Certificates Are Installed Generate the Directory Server client certificate Create a password file for the security token passwordCreating Directory Server Certificates 404 Starting the Server with TLS/SSL Enabled Through the Command LineCertutil Usage Certutil Options Select the certificate to use from the drop-down menu Click Cipher SettingsEnabling TLS/SSL Only in the Directory Server Enabling TLS/SSL Only in the Directory Described in , Starting and Stopping Servers 409 Server Click Cipher SettingsCheck the Use SSL in the Console box. Hit Save Creating a Password File for the Directory Server Creating a Password File for the Administration Server Creating a Password File for Available Ciphers Setting Security PreferencesRestart the Administration Server Administration Server TLSv1 Ciphers SSLv3 Ciphers Click Cipher SettingSelecting the Encryption Cipher Encryption tab, click Save Using Certificate-Based AuthenticationUsing Certificate-Based Authentication Setting up Certificate-Based Authentication Allowing/Requiring Client Authentication Configuring Ldap Clients to Use SSL Configuring Ldap Clients to Use SSLStop the Directory Server Now start Red Hat Console Client certificate resembles the following Begin Certificate Configuring Ldap Clients to Use SSL Click Set Value 420 Authentication Mechanisms Managing Sasl Managing Sasl Sasl is configured by entries under a container entry 422Sasl Identity Mapping 423 Sasl Identity MappingSasl identity mapping entries are children of this entry Configuring Sasl Identity Mapping from the Console Configuring Sasl Identity Mapping from Configuring Sasl Identity Mapping from the Command-Line Configuring KerberosSupported Kerberos Systems Operating System Kerberos Version Configuring the KDC Server Realms Example Configuring an Example KDC Server Configuring Sasl Authentication at Directory Server Startup Configuring Sasl Authentication at Managing Sasl Defining a Log File Rotation Policy Viewing and Configuring Log FilesAdministration Express Monitoring Server and Database Activity Access Log Viewing the Access LogDefining a Log File Deletion Policy Defining a Log File Deletion Policy Configuring the Access Log Display to refresh automatically every ten seconds Error Log Error LogViewing the Error Log Click Save 436 Configuring the Error LogContaining text box, and click Refresh Configuring the Audit Log Audit LogViewing the Audit Log Audit Log Manual Log File Rotation Monitoring Server Activity Monitoring the Server from the Directory Server Console Monitoring the Server from the Directory General Information Server Resource SummaryResource Usage Since Startup Average Per Minute Resource Current Total Current Resource Usage Server ConsoleConnection can account for multiple Operations, and therefore multiple threads Connection Status Monitoring the Directory Server from Monitoring the Directory Server from the Command LineGlobal Database Cache Information Attribute Description 444 Time GMT in UTC format Monitoring Database ActivityServer Monitoring Attributes See , Tuning Database Maximum Cache Size setting. See SectionGeneral Information Database Performance Metric Current Total Tuning Database Performance for Cache setting. See , TuningSummary Information Monitoring Database Activity from 10. Database File-Specific Monitoring Databases from the Command LineDatabase Cache Information Directory Server Console Maximum Entries in Cache attribute Monitoring Database Link Activity 11. Directory Server Monitoring AttributesMonitoring Database Link Activity Lower the number of page evicts the better 12. Database Link Monitoring Attributes 452 Snmp About Snmp Configuring the Master Agent Configuring the Subagent Subagent Configuration FileMonitoring Directory Server Using Snmp Agentx-master Starting the Subagent Agent-logdirServer Starting the Subagent Configuring Snmp Traps Testing the Subagent Configuring the Directory Server for Snmp Configuring the Directory Server for SnmpUsing the Management Information Base Operations Table Managed Object Description Operations Table Managed Objects and Descriptions Entries Table Entries Table Managed Objects and Descriptions Entries TableEntity Table Interaction Table Interaction TableEntity Table Managed Objects and Descriptions Interaction Table Managed Objects and Descriptions Management subsystem was initialized, thisObject will contain a value of zero 462 Tuning Directory Server Performance Tuning Server Performance Optimizing Search Performance Tuning Database PerformanceTuning Directory Server Performance Optimizing Search Performance Tuning Transaction Logging Changing the Location of the Database Transaction Log Changing the Database Checkpoint Interval Changing the Database Checkpoint Interval Specifying Transaction Batching Miscellaneous Tuning TipsDisabling Durable Transactions Avoid Creating Entries Under the cn=config 470 Server Plug-in Functionality Reference Bit Check Plug-inACL Plug-in Details of 7-Bit Check Plug-in Administering Directory Server Plug-ins ACL Preoperation Plug-inBinary Syntax Plug-in Details of ACI Plug-in Boolean Syntax Plug-in Case Exact String Syntax Plug-inDetails of Binary Syntax Plug-in Details of Boolean Syntax Plug-in Case Ignore String Syntax Plug-in Chaining Database Plug-inDetails of Case Exact String Syntax Plug-in Details of Case Ignore String Syntax Plug-in Class of Service Plug-in Details of Class of Service Plug-inClass of Service Plug-in Country String Syntax Plug-in Distinguished Name Syntax Plug-in Generalized Time Syntax Plug-in10. Details of Country String Plug-in 11. Details of Distinguished Name Syntax Plug-in Integer Syntax Plug-in Internationalization Plug-in12. Details of Generalized Time Syntax Plug-in 13. Details of Integer Syntax Plug-in Ldbm Database Plug-in Legacy Replication Plug-in14. Details of Internationalization Plug-in 15. Details of ldbm Database Plug-in Multi-Master Replication Plug-in Octet String Syntax Plug-in16. Details of Legacy Replication Plug-in 17. Details of Multi-Master Replication Plug-in Clear Password Storage Plug-in Crypt Password Storage Plug-in19. Details of Clear Password Storage Plug-in 18. Details of Octet String Syntax Plug-in NS-MTA-MD5 Password Storage Plug-in 20. Details of Crypt Password Storage Plug-in21. Details of NS-MTA-MD5 Password Storage Plug-in NS-MTA-MD5 Password Storage Plug-in 22. Details of SHA Password Storage Plug-in SHA Password Storage Plug-inSsha Password Storage Plug-in 23. Details of Ssha Password Storage Plug-in Postal Address String Syntax Plug-inPTA Plug-in 24. Details of Postal Address String Syntax Plug-in Using the Pass-through Authentication Plug-inSee , Using the Pass-through Referential Integrity Postoperation Plug-in Retro Changelog Plug-in 26. Details of Referential Integrity Post-Operation Plug-inRetro Changelog Plug-in See , Managing Indexes for Roles Plug-in Space Insensitive String Syntax Plug-in27. Details of Retro Changelog Plug-in 28. Details of Roles Plug-in State Change Plug-in 29. Details of Space Insensitive String Syntax Plug-inState Change Plug-in See Appendix B, Finding Directory Entries Telephone Syntax Plug-in UID Uniqueness Plug-in30. Details of State Change Plug-in 31. Details of Telephone Syntax Plug-in See , Using the Attribute URI Plug-in32. Details of UID Uniqueness Plug-in URI Plug-in Enabling and Disabling Plug-ins 33. Details of URI Plug-in Using the Pass-through Authentication Plug-in How Directory Server Uses PTA Using the Pass-through Authentication Plug-in PTA Plug-in Syntax PTA Plug-in Syntax Variable Definition Specifying the Pass-through Subtree for Configuring the Optional Parameters forSee .5, Configuring the Optional PTA Plug-in Parameters Configuring the PTA Plug-inConfiguring the PTA Plug-in Turning the Plug-in On or Off Configuring the Servers to Use a Secure ConnectionSpecifying the Authenticating Directory Server Specifying the Pass-through Subtree Specifying the Pass-through Subtree Configuring the Optional Parameters PTA Plug-in Syntax Examples PTA Plug-in Syntax Examples Specifying Multiple Authenticating Directory Servers Using Non-Default Parameter Values Specifying Different Optional Parameters 502 Using the Attribute Uniqueness Plug-in Overview of the Attribute Uniqueness Plug-in Using the Attribute Uniqueness Plug-in Attribute Uniqueness Plug-in Syntax 505 Attribute Uniqueness Plug-in SyntaxSee .3.1, Turning the Plug-in On or Creating an Instance of the Attribute Uniqueness Plug-in Attribute Uniqueness Plug-in Variables Configuring Attribute Uniqueness Plug-ins Configuring Attribute Uniqueness Plug-insViewing Plug-in Configuration Information From the Configuration tab From the Property Editor 509 Turning the Plug-in On or OffSpecifying a Suffix or Subtree Using the markerObjectClass and requiredObjectClass Keywords From the Command-Line Attribute Uniqueness Plug-in Syntax ExamplesSpecifying One Attribute and One Subtree Specifying One Attribute and Multiple Subtrees Replication and the Attribute Uniqueness Plug-in Simple Replication Scenario Multi-Master Replication Scenario Multi-Master Replication Scenario 514 About Windows Sync Active Directory Directory Server Synchronization Process About Windows Sync 517 Configuring Windows Sync Configure SSL on Directory Server Select the Enterprise Root CA option Configure the Active Directory DomainConfigure the Active Directory Select or Create the Sync Identity Iv. Accept the certificate request. For example Install and Configure the Password Sync Service Domain Hit Next, then Finish to install Password Sync Reboot the Windows machine to start Password Sync Install and Configure the Password 523 Configure the Directory Server Database for Synchronization Give trusted peer status to the server Sync Service Create the Synchronization Agreement Setting up the Sync Agreement Using Windows Sync Begin SynchronizationBegin Synchronization Synchronizing Users Synchronizing Groups Deleting Entries Synchronizing Users 529 Synchronizing UsersDirectory Server Active Directory Synchronizing Groups PhysicalDeliveryOfficeName Deleting Entries Deleting EntriesNtGroupAttributes NtGroupId Name SamAccountName NtGroupType Description Member SeeAlso Resurrecting Entries Manually Updating and Resynchronizing Entries Checking Synchronization Status Checking Synchronization StatusModifying the Sync Agreement Schema Differences Password PoliciesGroups Values for street and streetAddress Password Sync Service Modifying Password SyncStarting and Stopping the Password Sync Service Contraints on the initials attribute Troubleshooting Uninstalling Password Sync ServiceTo uninstall the Password Sync service, do the following Open the Add/Remove Programs utility Troubleshooting 537 538 Appendix A. Ldap Data Interchange Format About the Ldif File Format Continuing Lines in Ldif Table A.1. Ldif FieldsAppendix A. Ldap Data Interchange Format Field Definition Representing Binary Data Standard Ldif NotationBase-64 Encoding Representing Binary Data Specifying Directory Entries Using Ldif Specifying Domain Entries Table A.2. Ldif Elements in Domain Entries Specifying Organizational Unit EntriesDomain Entries Ldif Element Description Specifying Organizational Unit Entries Specifying Organizational Person Entries Specifying Organizational Person EntriesTable A.3. Ldif Elements in Organizational Unit Entries Defining Directories Using Ldif Table A.4. Ldif Elements in Person Entries Defining Directories Using Ldif 547 Ldif File Example Storing Information in Multiple Languages Storing Information in Multiple Languages File contents are then converted to UTF-8 550 Finding Entries Using the Directory Server Console Figure B.1. Browsing Entries in the Directory Tab Using ldapsearch Appendix B. Finding Directory Entries Ldapsearch Command-Line Format Ldapsearch command must use the following format Commonly Used ldapsearch Options Commonly Used ldapsearch Options Ldapsearch Examples Returning All Entries Specifying Search Filters on the Command Line Searching the Schema EntryUsing Ldapbasedn Searching the Root DSE Entry This example assumes the search base is set with Ldapbasedn Specifying Search Filters Using a FileDisplaying Subsets of Attributes Using Client Authentication When Searching Ldap Search FiltersSpecifying DNs That Contain Commas in Search Filters Ldap Search Filters Using Attributes in Search Filters Using Operators in Search FiltersSearch Filter Syntax Basic syntax of a search filter is Using Compound Search Filters Table B.1. Search Filter OperatorsSearch Filter Syntax Search Type Operator Description Table B.2. Search Filter Boolean Operators Operator Symbol DescriptionSearch Filter Examples Searching an Internationalized Directory Searching an Internationalized Directory Matching Rule Filter Syntax Matching Rule Formats Using an OID for the Matching Rule Using a Language Tag for the Matching RuleMatching Rule Filter Syntax 565 Using Wildcards in Matching Rule Filters Using an OID and Suffix for the Matching RuleUsing a Language Tag and Suffix for the Matching Rule Table B.3, Search Types, Operators, and Suffixes Search Type Operator Suffix Supported Search TypesSupported Search Types International Search Examples Less-Than ExampleLess-Than or Equal-to Example Equality Example Greater-Than or Equal-to Example Greater-Than ExampleSubstring Example International Search Examples But either one of these will work correctly 570 Components of an Ldap URL Ldap URLs have the following syntaxComponent Hostname Port Component Description Table C.1. Ldap URL ComponentsAppendix C. Ldap URLs Escaping Unsafe Characters Examples of Ldap URLsEscaping Unsafe Characters Unsafe Character Escape Characters Example Examples of Ldap URLs 575 576 Appendix D. Internationalization About Locales Locale Language Tag Collation Order Object Identifiers OIDs Identifying Supported LocalesAppendix D. Internationalization 579 Table D.1. Supported LocalesSupported Language Subtypes Supported Language Subtypes Table D.2. Supported Language Subtypes Troubleshooting Matching RulesTroubleshooting Matching Rules 582 See Also ID list scan limit See Also access control instructionSee Also access control list Glossary ValueSee base DN See bind DN See Also virtual list view index See Certificate Authority Directory Access Protocol. The ISO X.500 standard protocol That provides client access to the directorySee Ldap client See Also template entry See CoS definition entry See directory treeSee distinguished name See Directory Manager See Directory Server Gateway See Also cascading replication See Ldap Data Interchange Format See supplier See Snmp master agent Directory tree See Also access rights See object identifierEncoded messages which form the basis of data exchanges Between Snmp devices. Also protocol data unit Name. Also relative distinguished name Receives to the authenticating directory serverAuthenticating directory server, pass-through subtrees, Request for Comments. Procedures or standards documents Process is called a referralSubmitted to the Internet community. People can send Comments on the technologies before they become accepted See supplier-initiated replication Directory Server during installationServer Instance Entry. The ID assigned to an instance See Snmp subagent Simple Network Management ProtocolSubagent See Also browsing index See CoS template entryProtocol. Also Transport Layer Security Page 600 Index Index Page Index Page Index Ldapbasedn Index Ldif Index MIB Index Page Index Page MIB Page Index