Battery
Description | Spare part number |
|
|
Battery, | |
|
|
Before removing the battery, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the keyboard/top cover (see Keyboard/top cover on page 30).
Remove the battery:
1.Disconnect the battery cable (1) from the system board.
2.Release the ZIF connector (2) to which the audio/USB board cable is attached, and then disconnect the audio/USB board cable from the system board.
3.Detach the audio/USB board cable (3) from the battery. (The audio/USB board cable is attached to the battery with
4.Remove the two PM2.4×5.7 screws (4) that secure the battery to the bottom cover.
5.Lift the right side of the battery (5) until it rests at an angle.
6.Remove the battery (6) by sliding it up and to the right.
Reverse this procedure to install the battery.
34 Chapter 5 Removal and replacement procedures
