TouchPad
NOTE: The TouchPad spare part kit includes the TouchPad cable.
Description | Spare part number |
|
|
For use only on computer models equipped with an AMD processor | |
|
|
For use only on computer models equipped with an Intel processor | |
|
|
Before removing the TouchPad, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the keyboard/top cover (see Keyboard/top cover on page 30).
Remove the TouchPad:
1.Turn the keyboard/top cover upside down with the front toward you.
2.Remove the two Philllips PM1.9×2.4 broad head screws (1) that secure the TouchPad to the keyboard/top cover.
NOTE: When removing the TouchPad, make sure the cable is released through the opening
(2) in the keyboard/top cover.
3.Remove the TouchPad and cable (3) by releasing them from the top surface of the keyboard/ top cover.
4.Remove the TouchPad.
Reverse this procedure to install the TouchPad.
TouchPad 33
