Inserting a SIM, Removing a SIM | HP XU103UT specs

Inserting a SIM

NOTE: To identify the SIM slot location, refer to the Getting Started guide.

1.Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.

2.Close the display.

3.Disconnect all external devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Remove the battery.

6.Insert the SIM into the SIM slot, and gently press the SIM into the slot until it is firmly seated.

CAUTION: When inserting a SIM, position the card to match the icon next to the SIM slot on the computer. If a SIM is inserted incorrectly, it could damage the SIM and the SIM connector.

To reduce the risk of damage to the connector, use minimal force when inserting a SIM.

7.Replace the battery.

NOTE: HP Mobile Broadband is disabled if the battery is not replaced.

8.Reconnect external power and external devices.

9.Turn on the computer.

Removing a SIM

NOTE: To identify the SIM slot location, refer to the Getting Started guide.

1.Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the power button. Then shut down the computer through the operating system.

2.Close the display.

3.Disconnect all external devices connected to the computer.

4.Unplug the power cord from the AC outlet.

5.Remove the battery.

6.Press in on the SIM, and then remove it from the slot.

7.Replace the battery.

8.Reconnect external power and external devices.

9.Turn on the computer.

8	Chapter 2 Networking (select models only)

Image 18

HP XU103UT manual Inserting a SIM, Removing a SIM

Contents

HP Notebook Product notice Safety warning notice Iv Safety warning notice Table of contents VGA Hdmi External cards and devices Security Computer Setup Bios and Advanced System Diagnostics Appendix C Electrostatic discharge Index Introduction Finding more information about your new computerSelect Start All Programs HP HP Documentation Networking select models only Creating a wireless connectionIdentifying wireless and network status icons Windows Windows Vista Using operating system controls Turning wireless devices on or offUsing HP Connection Manager select models only Select Start All Programs HP HP Connection Manager Using a Wlan Connecting to an existing WlanSelect Start Connect to Setting up a new Wlan Protecting your Wlan Using HP Mobile Broadband select models only Roaming to another network Inserting a SIM Removing a SIM Connecting to a wired network Using GPS select models onlyUsing Bluetooth wireless devices Bluetooth and Internet Connection Sharing ICS Connecting a modem cable Connecting a country- or region-specific modem cable adapter Selecting a location setting Adding new locations when traveling Windows Select Start Devices and Printers Connecting to a local area network LAN select models only Page Using the media activity controls MultimediaAudio Checking audio functions on the computer Adjusting the volumeSelect Start All Programs Accessories Sound Recorder Select Start Control Panel Hardware and Sound Sound Webcam select models only VideoPage Hdmi Configuring audio for Hdmi Intel Wireless Display select models only Power management Shutting down the computerWindows 7-SelectStart Shut down Setting power options Using power-saving statesInitiating and exiting Sleep Viewing the current power plan Using the power meterUsing power plans Initiating and exiting Hibernation Selecting a different power plan Customizing power plans Setting password protection on wakeup Finding additional battery information Using HP Power Assistant select models onlyUsing battery power Select Start All Programs HP HP Power Assistant Maximizing battery discharge time Using Battery CheckDisplaying the remaining battery charge Managing low battery levels Conserving battery power Resolving a low battery level Disposing of a used battery Using external AC powerStoring a battery Replacing the battery Testing an AC adapter Switchable graphics/dual graphics select models only Using switchable graphics select models only Using dual graphics select models only Using Media Card Reader cards select models only External cards and devicesInserting a digital card Using ExpressCards select models only Configuring an ExpressCardRemoving a digital card Inserting an ExpressCard Using smart cards select models only Removing an ExpressCard Using a USB device Inserting a smart cardRemoving a smart card Using 1394 devices select models only Connecting a USB deviceRemoving a USB device Using an eSATA device select models only Connecting a 1394 deviceRemoving a 1394 device Connecting an eSATA device Removing an eSATA device Using a serial device select models only Using optional external devicesUsing optional external drives Using the expansion port select models only Using the docking connector select models only Drives Handling drives Using Disk Cleanup Using hard drivesUsing Disk Defragmenter Improving hard drive performance Using HP 3D DriveGuard select models only Managing power with a parked hard driveIdentifying HP 3D DriveGuard status Using HP 3D DriveGuard software Using optical drives select models onlyIdentifying the installed optical drive Inserting an optical disc Removing an optical disc Slot-load When the disc tray opens normally Slot-load Using RAID select models only Sharing optical drives Security Protecting the computer Using passwords Setting passwords in Windows Password Function Setting a new Bios administrator password Setting passwords in Computer SetupManaging a Bios administrator password Changing a Bios administrator password Managing a Computer Setup DriveLock password Entering a Bios administrator passwordDeleting a Bios administrator password Setting a DriveLock password Entering a DriveLock password Changing a DriveLock passwordRemoving DriveLock protection Using Computer Setup Automatic DriveLock Entering an Automatic DriveLock passwordRemoving Automatic DriveLock protection Using antivirus software Using firewall softwareInstalling critical security updates Using HP ProtectTools Security Manager select models only Installing an optional security cable Using the fingerprint reader select models only Locating the fingerprint reader Cleaning products MaintenanceCleaning your computer Cleaning procedures Cleaning the sides and cover Cleaning the TouchPad and keyboardUpdating programs and drivers Using SoftPaq Download Manager Starting Computer Setup Computer Setup Bios and Advanced System DiagnosticsUsing Computer Setup Navigating and selecting in Computer Setup Restoring factory settings in Computer Setup Downloading a Bios update Updating the BiosDetermining the Bios version Select Start Help and Support Maintain Using Advanced System Diagnostics Page MultiBoot About the boot device order Enabling boot devices in Computer Setup Considering boot order changes Choosing MultiBoot preferences Setting a new boot order in Computer Setup Dynamically choosing a boot device using the f9 prompt Setting a MultiBoot Express promptEntering MultiBoot Express preferences Using Client Management Solutions Configuring and deploying a software imageComputer Management Managing and updating software HP Client Manager for Altiris select models only HP CCM Client Configuration Manager select models only HP SSM System Software Manager Using the MEBx setup utility menus Using Intel Active Management Technology select models onlyEnabling the iAMT solution Intel ME Configuration IAMT Configuration Change Intel ME Password Traveling with the computer Page Troubleshooting resources Electrostatic discharge Symbols/Numerics Index Keys SIM