You must adjust the audio settings in two places after you have installed and connected the HP Digital Entertainment Center to your audio system.
Configure both the Media Center speaker settings and audio for the DVD player.
The following table shows which procedures to perform for your audio system. If you set up speakers using the Media Center Optional Components wizard, then set up the audio for the DVD player only.
Media Center |
|
|
speaker |
|
|
settings | DVD audio |
|
(TV Audio) | setting | Procedure |
|
|
|
2 | 2 speakers; | Default, no audio output configuration required. |
(default) | Dolby Surround |
|
| Compatible |
|
| (default) |
|
|
|
|
5.1 | 5.1 | Change settings. See “Configuring audio for Media Center” on |
|
| page 139 and “Configuring audio for the DVD player” on page 139. |
|
|
|
7.1 | 7.1 | Change settings. See “Configuring audio for Media Center” on |
|
| page 139 and “Configuring audio for the DVD player” on page 139. |
|
|
|
Digital Audio | Digital Audio | Change settings. See “Configuring audio for the DVD player” on |
S/PDIF on | S/PDIF off | |
(default) | (default) | If you use digital audio, the Media Center S/PDIF default setting is on, |
|
| |
|
| but the DVD Player S/PDIF default setting is OFF. You must change the |
|
| DVD S/PDIF default setting to ON to hear all channels in DVD digital |
|
| audio. |
|
|
|
138HP Digital Entertainment Center