Problem (continued)

Solution

 

 

When I push one of the

■ Check that the standard keyboard keys and mouse work properly.

special or multimedia

Or

 

buttons on the

 

■ Check the button configuration.

keyboard, nothing

happens.

To configure the button:

 

1 Click Start on the taskbar, and then click Control Panel.

 

2 Click Printers and Other Hardware, if it is available.

 

3 Double-click Keyboard.

 

4 In the Keyboard Properties window that opens, click the Buttons tab.

 

5 Double-click the button you want to change. The button configuration window

 

opens.

 

6 Choose the button capability from the drop-down list. Enter the Display label

 

and the Address information. (For a Web site, enter the complete Web site URL

 

in the Address box.)

 

7 Click OK and then on the Buttons tab, click Apply.

 

8 Repeat steps 5 through 7 for each button you want to configure.

 

9 Click OK when you are finished configuring the keyboard.

 

 

My keyboard or the

■ Make sure the trackball is clean. If the trackball stops moving easily, the

trackball doesn’t work

trackball and rollers probably require cleaning.

even though the

a Rotate the trackball-cover ring counter-clockwise to remove the ring and

HP Digital

 

release the trackball.

Entertainment Center

 

b Rinse the trackball with soap and warm water.

and TV or monitor seem

c Clean the rollers inside the HP Digital Entertainment Center with a cotton

to work.

 

 

swab dampened with isopropyl alcohol.

 

d Replace the trackball and the trackball-cover ring.

 

■ Make sure the keyboard syncs with the HP Digital Entertainment Center. See

 

“Synchronizing the Keyboard” on page 130.

 

■ Try restarting the HP Digital Entertainment Center as follows:

 

a Click Start on the taskbar.

 

b

Click Turn Off Computer.

 

c

Click Restart.

 

 

 

166HP Digital Entertainment Center