HP z560, z565 Powered Speaker Audio Connection

Powered Speaker Audio Connection

You can connect active (powered) speakers directly to your HP Digital Entertainment Center. An active speaker system must have its own power cord.

You may need Y adapter cables (sold separately).

Select the configuration that most closely

matches your home system. See:

“2.1 Powered Speakers” on page 49

“4.1 Powered Speakers” on page 50

“5.1 Powered Speakers” on page 51

“7.1 Powered Speakers” on page 52

You can also use a digital connection. “Digital Powered Speakers” on page 53

Y adapter cables

The HP Digital Entertainment Center has RCA-type output connectors. You may need to connect Y adapter cables between your HP Digital Entertainment Center analog audio output and your powered speaker inputs. You can also use them for audio inputs depending on your equipment.

Use Y adapter cables with one female 1/8 inch (3.5 mm) stereo mini-jack on one end and two male RCA connectors on the other end. These cables are sold separately.

The number of Y adapter cables you need to connect to your home stereo system depends on the number of speakers you install.

Select the cable that most closely matches

your home system:

2.1speaker system: 1 Y adapter cable

4.1speaker system: 2 Y adapter cables

5.1speaker system: 3 Y adapter cables

7.1speaker system: 4 Y adapter cables

n

Y adapter cables and extension cables are sold separately.

48HP Digital Entertainment Center