Video Out from AV Receiver to TV
Switching: Switch audio and video through your AV receiver if your AV receiver switches video and has the correct connections. This method gives you the best audio quality, and you can easily switch audio/video inputs through your AV receiver remote.
Connectors: Choose a Video Out connector and corresponding cable that attaches to the back of your TV:
Standard | High |
|
definition | definition |
|
TV | display | Monitor |
Component | Component |
|
(Y, Pb, Pr) | (Y, Pb, Pr) |
|
| VGA | VGA |
| HDMI | HDMI |
Equipment: The TV, AV receiver, and some cables are sold separately. See the documentation that came with your TV and AV receiver.
Configuration: You can adjust the TV display, after initial turn on, using the Media Center software settings. See “Initial Configuration” on page 127.
Procedure:
If your TV and AV receiver has multiple input and output connections, then it has front panel input and output switches.
You must select the correct input and output from the TV and AV receiver front panel or remote control to hear sound and see video.
Component video output requires specific configurations for certain display types and resolutions. Go to http://www.hp.com/ support and select your model number for instructions on using component video.
1Connect a video cable from the HP Digital Entertainment Center back panel Video Out to the AV receiver Video In.
2Connect a video cable from the AV receiver Video Out to the TV Video In. Use the same connector type if your AV receiver does not support cross- connecting.
Connecting Video Out
Connecting Video Out 65