Other function modes:
•Brief mode 10 s
Application: Shredding foils, credit cards and small bits of paper
Function: The cutting unit runs for approx.
10 seconds and is then switched off auto- matically.
Start: Press the operation button for two seconds.
Premature cancellation: Press the operation button.
•Permanent mode
Application: Shredding CDs and large quanti- ties of paper and foils
Function: Cutting unit runs continuously. If no material is fed in within a period of
2 minutes, the cutting unit shuts down and the shredder switches to standby.
Start: Press the operation button for four seconds.
Premature cancellation: Press the operation button.
•Sleep mode
Function: Two minutes after the last paper feed operation, all consumers that are not required are switched off automatically.
The "Ready for operation" indicator flashes briefly at regular intervals.
The shredder starts automatically when pa- per is fed in.
•Automatic shutdown
Function: If the shredder is not used for four hours, it shuts down completely and there- fore does not consume any more electricity (at night, at the weekend).
Restart: Press the operation button.
english
5 Troubleshooting
Display Problem | Measure |
Paper | You have fed in too much paper. |
jam | The cutting unit runs in reverse for a few seconds and pushes the pa- |
| per back out again. |
•If necessary, press the reverse button “R” to remove the stack of paper.
•Take half the stack of paper.
•Feed the paper in portions.
Note:
This indicator lamp also lights up when the motor is overloaded. In this case, let the shredder cool down for 20 minutes before using it again.
Shredded | • | Empty the shredded material container. |
material |
| Note: |
container |
| If you press the reverse button briefly before removing the container, |
full |
| part of the material is pulled back into the cutting apparatus. |
Container | • | Insert the shredded material container correctly in the base cabinet. |
open |
|
|
0804 | 11 |
