HTC 99HLR002-00 manual Taking a photo, Zooming

Camera 107

Zooming

Before taking a photo or video, you can first use the onscreen zoom bar to zoom in or out of your subject.

When you’ve just opened the camera or switched between photo and video modes, the zoom bar shows on screen for a few seconds. To display it again so you can zoom, do the following:

Tap anywhere on the Viewfinder screen. Then slide your finger across the zoom bar to zoom in or out.

In photo mode, tapping on the Viewfinder screen moves the focus to your tapped area. To avoid moving the focus, press the VOLUME UP or VOLUME DOWN button to zoom.

When you’re recording video, the zoom bar is always shown onscreen. You can freely zoom in or out while recording.

If you choose 720p HD resolution for video recording, there’s no zooming available. If you’re using the second camera, there’s no zooming available.

Taking a photo

1.From the Home screen, tap > Camera.

2.Before taking the photo, you can zoom in or out first on your subject. To find out how, see "Zooming".

3.Tap the Flash button repeatedly to choose a flash mode depending on your lighting conditions.

Auto flash Flash on Flash off

4.Choose the resolution and other camera settings you want to use. See "Changing camera settings" for details.

5.You can choose an effect to apply to your photo. See "Adding effects" for details.

6.Point the camera and focus on your subject. See "Auto focusing" for details.

Then tap or press the CAMERA button to take the photo.

You can also set the camera to automatically take a photo without the need for you to tap the shutter release button. See "Auto capturing" for details.

7.Choose what you want to do with the photo you’ve just taken. See "After capturing" for details.

You can also take a photo using the second camera. Just tap onscreen to switch to the second camera. When you’re using the second camera to take photos, some of the features like flash, auto focus, and zooming are not available.