HTC Dash 3G Voice Command, To make a call or launch a program using Speed Dial, To call a contact

176  Using Other Applications

To make a call or launch a program using Speed Dial

If you have assigned a speed dial key to a contact or a program in Speed Dial, do the following to dial the contact’s number or open the associated program:

•Press and hold the assigned key, if it is a single-digit speed dial number.

•To dial a two-digit speed dial number, press the first number key first, and then press and hold the second number key.

To delete a speed dial entry

1.On the Home screen, select Start > Applications > Speed Dial.

2.Select the desired entry and select Menu > Delete.

11.4  Voice Command

Voice Command lets you call your contacts, open applications, play back music, and get calendar information just by using your voice. Voice Command only responds to a set of predefined commands. You cannot create your custom commands in Voice Command.

Pressing and holding the SHORTCUT KEY () activates Voice Command. When

Voice Command is activated, the icon will appear at the upper-right corner of the screen.

To call a contact

1.Hold the phone a few inches away from your mouth.

2.Press and hold the SHORTCUT KEY to activate Voice Command.

3.In a clear voice, say “Call [Contact Name].”

4.Voice Command will confirm with you the contact you want to call. After the Voice Command confirmation, say “Yes” or “Correct.”

Note If Voice Command is wrong about the contact to call, say "No" or "Incorrect" to try again.

5.The phone calls the contact.