HTC Dash 3G manual Setting Up Bluetooth SIM Access for Car Kit Phones

Using Phone Features  53

2.6  Setting Up Bluetooth SIM Access for Car Kit Phones

Car kits that support the SIM Access Profile (SAP) can connect to your phone and access your SIM card via Bluetooth.

Notes • Make sure that all phone contacts are stored in the SIM card and not in the phone memory. Configure the car kit to download contacts only from the SIM card.

•Contact T-Mobile to find out which car kit phone models are compatible with your phone.

1.In your phone, make sure that Bluetooth is turned on and set to visible mode. For instructions, see “Bluetooth modes” in Chapter 8.

2.Select Start > Settings > Connections > Bluetooth > SIM Access.

3.On the BT Remote SIM Access screen, select the Remote SIM Access check box and select Done.

4.Connect the car kit phone to your phone via Bluetooth. For instructions, consult your car kit phone’s manual.

5.A pop-up message should appear on your phone saying that a connection has been established between your phone and car kit. Select OK.

6.On the BT Remote SIM Access screen, select Done.

Note You will not be able to make/receive calls, send/receive messages or perform related activities on your phone when the SIM Access Profile connection is active. You will be able to do all this from the car kit phone during this time.