HTC Dash 3G manual Counter

	Camera and Multimedia  161
Option	Allows you to
Review Duration	Set a time length for displaying the captured image or video on
	the Review screen before automatically saving it and returning
	to the live Camera screen. Select No Limit to allow the picture
	to be displayed until you choose to take another action. Select
	No Review to immediately return to the live Camera screen after
	capturing.
Effect	Choose a special effect such as Grayscale, Sepia, or Negative to
	apply to your photos or video clips.
	Note: White Balance cannot be applied if an Effect has already
	been applied.
Metering Mode	Select a metering mode to allow the camera to measure the
	amount of light in the center and around the image and calculate
	the best-fit exposure value before capturing. Choose either Center
	Area to measure light using the center area of the image or
	Average to measure light using the area all around the image.
Record with Audio	Select On to record audio while capturing video clips. This is
(Video and Video	selected On by default. If you select Off and then capture a video
Messaging modes only)	clip, it will have no audio.
Prefix	Set a prefix to image or video filenames.
	When Default is selected as the prefix, the filename of each new
	captured file is set to “IMAGE” or “VIDEO” followed by a sequential
	number, for example: IMAGE_001.jpg. You may also choose to
	prefix filenames using either the current Date or Date & Time.
	Note: If you set the Camera to save captured photos to a storage
	card, the prefix cannot be selected. Captured photos will be
	named using the DCIM (Digital Camera Images) naming standard.
Counter	Select Reset to reset the naming counter to 1.