HTC IMAP4, POP3 Getting Ready, Install the storage card and SIM card, Accessory Function

Models: IMAP4 POP3

1 34
Download 34 pages 25.44 Kb
Page 8
Image 8

8

No.

Accessory

Function

1

AC adapter

Recharges the battery.

2

USB Sync cable

Connects your device to a PC and synchronizes data.

3

Stereo headset

Provides a volume control slider and a Send/End button. Press the Send/End button

 

 

to pick up a call or put a call on hold; press and hold the button to end the call.

Make sure you connect this headset when using the FM Radio since it uses the headset as an antenna.

3.Getting Ready

Before you start using your device, you must install a SIM card and a charged battery. The SIM card contains your phone number and service details, and it stores phonebook entries and your messages.

If you need more storage for your device, you can also insert a microSD™ card inside the battery compartment. Insert the microSD™ card first before the SIM card, since the storage card slot is located underneath the SIM card slot.

Install the storage card and SIM card

1.Make sure your device is turned off.

2.Slide out the battery cover. If the battery is inside, remove by lifting it up from the upper right side of the battery slot using your finger.

3.Slide the SIM card holder downward to unlock it, then lightly flip it open.

4.Pry open the storage card holder.

5.Insert the microSD™ card and the SIM card into the respective card holders, with their gold contacts facing down. (The cut-off corner of the SIM card should match the cut-off corner in the SIM card slot).

Page 8
Image 8
HTC IMAP4, POP3 quick start Getting Ready, Install the storage card and SIM card, Accessory Function