HTC RAPH100 user manual Grid marks

204 Experiencing Multimedia

Choose either Center Area to measure light using the center area of the subject, or Average to measure light using the area around the subject.

•Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix.

Note If you set the Camera to save captured photos to a storage card, the prefix cannot be selected. Captured photos will be named using the convention IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on the storage card.

•Counter. To reset the file naming counter back to 1, tap Reset.

•Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by inconsistencies between the vertical scan rate of the camera display and the flicker frequency of fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to Auto or to the proper frequency (50Hz or 60Hz) of the power in the country where your device is being used.

•Grid (Photo mode). Choose whether or

not to show a grid on the Camera screen. Showing a grid helps you frame and center your subject easily and accurately.

•Record with Audio (Video and MMS Video mode). Select On to record audio with the captured video clips, or select Off to capture video without audio.

Grid marks

•Template (Picture Theme mode). Select a template.

•Recording Limit (Video mode). Set the maximum duration or file size for recording video.