HTC RAPH100 user manual Using the Strap Holder

Getting Started  33

1.4 Using the Strap Holder

The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory.

To attach a strap, lanyard or string accessory to the strap holder

1.Remove the back cover.

2.Insert the loop of the strap, lanyard or string accessory through the strap holder hole on the back cover.

Tip To pass through the strap holder hole easier, push the loop into the strap holder hole using a pointed object such as a needle or toothpick.

3.Attach the loop over the small T-shaped hook at the bottom of the device.

4.Secure the strap, lanyard or string

string accessory on the T-shaped hook as shown in the illustration on the right.

5. Replace the back cover.