HTC RAPH100 user manual Set up a printer, Print a file

242  Programs

Set up a printer

You must configure your device to connect to a printer before you can start printing.

1.Tap Start > Programs > JETCET PRINT.

2.If you are not in the Settings tab, tap the settings button ( ), then:

•Tap Add Network Printer to set up and connect to a shared network printer.

Note The device will wait continuously if you have entered an incorrect IP address while setting up a network printer.

•Tap Add Bluetooth Printer to set up and connect to a Bluetooth printer.

Note To learn how to set up a printer, refer to the JETCET PRINT help on your device.

Print a file

1.Tap Start > Programs > JETCET PRINT.

2.Locate and select the type of file that you want to print (document, image, or e-mail/PIM) by tapping the corresponding tabs on the left side of the screen.

3.Tap and hold the file that you want to print, then tap Print on the menu.

4.Select a printer in the Choose a Printer list box, select the paper size, then tap Next.

5.Choose the page layout in the list, then tap Next to print the file.

Tip	You can also print document and image files from File Explorer. To print, use File
	Explorer to locate the file you want to print. Tap and hold the file, then tap Print on
	the pop up menu.