Soft reset, Hard reset, To perform a soft reset | HTC RAPH100

286Managing Your Device

13.9Resetting Your Device

Soft reset

Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.

To perform a soft reset

1.Pull out the stylus.

2.Use the stylus tip to press the

RESET button located at the bottom of the device.

Your device restarts and displays the Home screen.

Hard reset

You can also perform a hard reset (also known as a full reset). A hard reset should only be performed if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings—the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.

Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.

Image 286

HTC RAPH100 user manual Soft reset, Hard reset, To perform a soft reset

Contents

Page Please Read Before Proceeding Page Disclaimers Important Health Information and Safety Precautions Limitation of Damages Handle battery packs carefully Use the correct external power sourceTake extra precautions Prevention of Hearing Loss Safety in Aircraft Earphone, manufactured by HTC, Model HS S300 Road Safety Nonionizing Radiation General Precautions Cleaning Mounting accessoriesAdjust the volume Avoid wet areas Contents Using Phone Features Entering Text 101 106 111 136 147 189 179193 211 225 240 Managing Your Device 267 291 303 Using your Device as a USB Drive Getting Started Getting to Know Your Touch Phone and Accessories Left panel Front panel END Back panel Top panel Bottom panel To remove the back cover Installing the SIM Card, Battery, and Storage CardAccessories To remove SIM card BatteryTo install the SIM card Slide the SIM card completely into the slot Battery life estimates approximations To install the battery To install a microSD card To remove the batteryStorage card To charge the battery Using the Strap Holder To turn off the power To turn on the powerPress and hold the Power button for a few seconds Turn your device on and off Switch to Sleep mode when not in use Auto configure the data connection settingsTo automatically configure data connection settings Swipe Finger-touch controlTouch or tap Flipping on the Home screen Advancing playback Switching between Home screen tabsSlide Flick Stylus Navigation Control Getting Started Signal strength Tasks screen Tip Icons that appear in this area Getting Started Vibrate mode Sound on Sound off Start Menu Quick Menu LED Alerts Adjusting the Volume Using your Device as a USB Drive Getting Started Using the Phone Voice Call Video Call Chapter Phone screen Using the PhoneEnter your PIN Press the TALK/SEND button to place the call Make a callTo make a call from the Phone screen To make a call from Contacts To make an emergency call Answer a callTo make a call from the TouchFLO 3D Home screen To make an international call To reject a call and send a text message Change the default text message if needed, then tap OKTo answer or reject an incoming call Select the Reject call with text message check box To put a call on hold To switch between two callsTo set up a conference call To turn on and off the Speakerphone To mute the microphone during a call To vibrate the device when the call is establishedEnd a call To open Notes while in a call To check a missed call Call HistorySpeed Dial To create a Speed Dial entry Turn the phone function on and off To enable or disable the phone functionTo enable or disable Airplane Mode Tap Start Programs Comm Manager Answer a video call Make a video callTo answer or reject an incoming video call End a video call Change settingsOnce a video call is in progress, tap End Call to hang up Brightness Video call options Camera options General tabDisplay info Smart Dial Services tabTo find a contact name or number Make a call or send a text message using Smart Dial Setting Up Bluetooth SIM Access for Car Kit Phones TouchFLO 3D Allows you to use finger gestures to navigate screens About TouchFLO 3DTouchFLO 3D Home screen have the following tabs To switch between the tabs of the Home screen Home To select an item on the Home tab See Calendar in for details People To add favorite contacts To choose from your favorite contacts Do any of the following Messages To add an e-mail account MailTo check e-mail Internet For more information about using Opera Mobile, see ChapterFor more information about working with e-mails, see To set an album as a Favorite Photos and VideosTo view photos and videos Music To play music To advance forward or backward in the music To set repeat and shuffle modes Touch Menu Add to Playlist To browse and play music in the LibraryTo use playlists Touch Menu Edit Touch Menu Add Custom playlists Windows Media Player playlists On the Weather tab, touch Menu Add Location WeatherTo add a city To view weather information On the Weather tab, touch Menu Settings To choose download options Settings Programs Finger scrolling To scroll up and down Finger panning Finger zoomingTo scroll left and right Entering Text On-screen input methods Entering InformationQwerty keyboard To show or hide the Input Panel, tap the Input Panel icon Icon Input method Using the Hardware Keyboard Tap to toggle between using Normal or T9 mode To enter text using the Full Qwerty Tap the Input Selector arrow, then tap Full Qwerty To enter text using the Compact Qwerty Tap the Input Selector arrow, then tap Compact Qwerty To enter text using the Phone Keypad Multitap modeT9 mode To enter text using T9 mode Tap the Input Selector arrow, then tap Touch Input Settings To customize Touch Input settingsTo add a word to the T9 dictionary To lock the keyboard in Numeric and Symbol mode To switch to Numeric and Symbol modeClear the Turn on one-touch symbol entry check box To use Block Recognizer To write using Transcriber To use Letter Recognizer To enter punctuation and symbols To edit text Entering Text Synchronizing Information With Your Computer About Synchronization Ways to synchronize Setting Up Windows Mobile Device Center on Windows Vista Using Bluetooth Set up synchronization in Windows Mobile Device Center Use Windows Mobile Device Center Set up synchronization in ActiveSync Setting Up ActiveSync on Windows XPInstall ActiveSync Click Setup and Installation From Windows Mobile Device Center Start and stop synchronizationFrom your device Click Start All Programs Windows Mobile Device Center Troubleshoot sync connection problem Change which information is synchronized To synchronize with a computer via Bluetooth On your device, tap Start Programs ActiveSync Synchronizing Music and Video Exchanging Messages To select a messaging account To configure message account settingsMessaging To automatically add a signature in outgoing messages From the TouchFLO 3D Home screen Create a new text messageSelect the Use signature with this account check box From the Account Picker screen From the Contacts screen Compose and send a text messageManage text messages Tap Start Contacts To copy a message in the thread to the SIM card To reply to a text messageTap Menu Copy to SIM To delete all messages in a thread To copy a text message from the SIM card to the deviceTo delete a message in the thread To reply to a text message with an MMS message To configure MMS message settings Change MMS settingsTap Start Messaging SMS \ MMS To compose an MMS message Create and send MMS messagesTap Start Messaging SMS \ MMS, then tap Menu New MMS Tap Send to send the MMS message To add text to an MMS message To add an audio clip to an MMS message To view an MMS message View and reply to MMS messagesTo reply to an MMS message To block a phone number from sending you MMS messages Tap Menu Save to Blacklist Tap Start Messaging Setup E-mail Add an e-mail account Set up an Internet e-mail account To specify e-mail server settings Tap Finish To customize download and format settings Options Description Set up a custom domain e-mail Touch the New E-mailicon to create a new e-mail Create a new e-mail messageTo start from an empty message To send an e-mail to a favorite contact To add an attachment to a message Compose and send an e-mailFilter the Inbox message list To filter your Inbox To download a complete e-mail View and reply to messagesTap Menu Download Message IMAP4 and Outlook e-mail accounts To download file attachmentsPOP3 e-mail account To reply to or forward a message To automatically synchronize an Outlook e-mail account Customize e-mail settingsSynchronize e-mails Tap Menu Send/Receive To automatically receive attachments on IMAP4 e-mails To change the download size and format for Internet e-mailTo automatically receive attachments on Outlook e-mails To store attachments on the storage card Exchanging Messages Working With Company E-mails and Meeting Appointments Synchronizing with the Exchange Server Set up an Exchange Server connectionTap Next again Start synchronization Tap Start Programs ActiveSync and then tap Sync To turn on Direct Push in Comm Manager Automatic synchronization through Direct PushOn the Comm Manager screen, touch Microsoft Direct Push To turn on Direct Push in ActiveSync Scheduled synchronizationInstant download through Fetch Mail Open an e-mail message Search for e-mails on the Exchange Server Tap Search To flag or unflag a message Flag your messagesClear Flag Remove the flag to unmark the message To send out-of-office auto-reply messages Out-of-office auto-replyTo reply to a meeting request To view the list of meeting participants Tap Start Calendar Synchronize with the Exchange Server Do any of the following Contacts, tap Menu Company Directory Working With Company E-mails and Meeting Appointments Working With Company E-mails and Meeting Appointments Internet Wi-Fi GPRS, 3G or Edge Dial-up Ways of Connecting to the InternetWi-Fi To turn Wi-Fi on and off To connect to a wireless network Enter the key and then tap Connect Wireless LAN screen To check wireless network statusTitle bar Configure Wireless Networks screen To save battery power while connected to a wireless network GPRS/3G To add a new GPRS/3G connection Dial-up To disconnect active data connections To manually start a data connectionTo open Opera Mobile Internet To go to a web site View web pagesTo change the screen orientation Opera Mobile menu On the menu bar, tap to open the menu To open YouTube Browse for videosTap Start Programs YouTube To change the program channel To add a new program channel into the Program Guide listTo delete a program channel from the Program Guide list Watching videos Playback Controls This control Does this Bookmarks History To access streaming content via Opera Mobile Tap Connect Tap Start Programs Streaming MediaTo view streaming video information Tap Menu Options to configure the following settings Set up Windows LiveTo configure streaming video connection settings To set up Windows Live for the first time Internet Windows Live interface Windows Live Messenger Tap Start Programs Messenger Launch Messenger and signTo open Windows Live Messenger To sign in and out To add a Windows Live contact in Live Messenger Add Windows Live contactsTo start and end conversations Tap Menu Add new contact Using Your Device as a Modem Internet Sharing To set up your device as a USB modem To use your device as a Bluetooth modem To end the Internet connection On the Internet Sharing screen, tap Disconnect To subscribe to news channels Subscribe to and organize news channelsTap Start Programs RSS Hub, then tap Continue Channel list appears. Tap Refresh to update the channels To add new channels To filter the channels in the display View and organize headlinesManage channel categories View the news summary After downloading the file, do one of the following To download, play, or save podcastsTo send the headline link via e-mail To view the next or previous news summary Bluetooth Bluetooth Modes Bluetooth Partnerships Bluetooth Modes To turn Bluetooth on and make your device visible To create a Bluetooth partnership To accept a Bluetooth partnership Connecting a Bluetooth Hands-free or Stereo HeadsetTo connect a Bluetooth hands-free or stereo headset Beaming Information Using Bluetooth To beam information from your device to a computer To beam a contact, tap Menu Send Contact Beam \Users\yourusername\My Documents in Windows Vista To use Bluetooth Explorer Printing Files via Bluetooth To print a Jpeg file To print contact informationTo print a calendar appointment To print a text file Bluetooth Navigating on the Road Guidelines and Preparation for Using GPS To open QuickGPS Tap Start Programs QuickGPS Auto download when connected to PC via ActiveSync Remind me when data expiresAuto download when data expires Download options Experiencing Multimedia Capture modes To change the capture modeTaking Photos and Videos To open the Camera screen Supported file formats Tap the screen to display the controls and indicators On-screen controls and indicatorsCamera controls Zoom control. Tap to zoom in, or to zoom out Progress indicator . In PictureTheme mode, tap to toggle among Different templates Menu Panel To zoom ZoomingTo zoom out Capture mode Resolution Zoom range Review screen Icon Function Advanced Options Experiencing Multimedia Grid marks To open Album Tap Start Programs Album Select a photo or video to view View an image To rotate the image To view the next or previous image To zoom in or out of an image To view still images as a slideshow Photos Videos tab Close Album Play back videoThen tap to go back to the main Album screen To open Windows Media Player Mobile Tap Start Programs Windows Media About the screens and menus About the controlsWindows Media Player Mobile has three primary screens To synchronize content to your device automatically Synchronize video and audio files To synchronize content manually to your device If you are not on the Library screen, tap Menu Library To update the LibraryPlay media To play video and audio files on your device Playlists TroubleshootingTo save a new playlist To open FM Radio FM Radio controlsTap Start Programs FM Radio Turns off FM radio Device controls used in FM Radio Save presetsVolume Control Radio display FM Radio Main Menu When done, tap OKTo listen to a preset FM station To save FM stations Tap the list box then select a desired preset To access Audio BoosterTo use a Equalizer preset Exit Select to turn off FM Radio To delete a custom equalizer preset To create a custom equalizer presetTap Menu Delete Preset To trim the MP3 file Tap Start Programs MP3 Trimmer Experiencing Multimedia Microsoft Office Mobile JBlend Comm ManagerVoice Recorder WorldCard Mobile 12.18 ZIP Programs on your Device Programs in the Start Menu Programs screen Programs Programs To uninstall a program To install a programTap Start Settings System tab Remove Programs To open Adobe Reader LE Tap Start Programs Adobe Reader LE To search for text in the document CalendarCreate appointments To open the Calendar screen To set the reminder time for new appointments Tap Menu Tools Options Appointments tab View appointments To send a meeting request Send appointmentsTo send appointment details as a vCalendar To open the Contacts screen ContactsAdd new contacts To add a contact on your device To add a contact to your SIM card Tap Categories Organize and search contactsTo group similar contacts To find a contact on your device To send contact information via text messaging Share contact informationTo beam a contact’s details To send contact information as a vCard To access the Comm Manager Open Jetcet Print Tap Start Programs Jetcet Print Set up a printer Print a file To use Microsoft Office Mobile Microsoft Office MobilePrint a web Tap Start Office Mobile Workbook To draw in a note When finished, tap OK to save and return to the note listTo create a note Create or open a note file Tap Start Programs Notes Install and launch MIDlets or MIDlet suitesTo record a voice note To open the Java program Manage MIDlets and MIDlet suites To download and install via Internet Explorer MobileTo install from your device To run a MIDlet or MIDlet suite To set MIDlet permission settings To update a MIDlet or MIDlet suiteTo configure the MIDlets environment setting To remove a MIDlet or MIDlet suite To copy SIM contacts to your device SIM ManagerTo create a contact on your SIM card To copy contacts to the SIM card To store your SIM card’s phone number Tap Menu Tools List of When your phone Own NumbersTap Menu Contacts to SIM Tap Voice Line Gprs Monitor icon and pop-up window Install Gprs MonitorSpb Gprs Monitor To show the Gprs Monitor icon on the title bar To enter your service plan details Set up monitoring and notificationSelect the Enable connection monitoring check box To select the connection to be monitored To set up traffic limit notifications View charts and reportsTo view charts and generate reports To open Sprite Backup Sprite BackupTo install Sprite Backup On your device, tap Start Programs Sprite Backup Use the check boxes to select or exclude items for backup Main screenBackup Data Selection screen To enable remote backup to a computer To restore dataOn the Sprite Backup main screen, tap Options Networking PC To change the priority of a task TasksTo create a task To show start and due dates in the task list Tap Start Programs Voice Commander Voice CommanderOpen Voice Commander To send task information as a vCalendar Tap Start Settings Personal tab Voice Commander Settings Create a voice tag for a contact Create a voice tag for a program To select or create a folder where to save voice recordingsVoice Recorder To record your voice To play back a voice recording See MMS in to learn how to compose and send MMS messagesTo beam a voice recording via Bluetooth To send a voice recording through MMS To rename or move a recording To install WorldCard MobileTo set a voice recording as ring tone To open WorldCard Mobile Capture and export business card information On the WorldCard Mobile screen, tap Recognize Programs To open a ZIP file and extract files To start ZIP on your deviceTap Start Programs ZIP Touch Menu Action Extract Touch File New Archive To create a new zip archiveTouch Menu Action Add Managing Your Device Connect your device to the computer To manage files on your device using File ExplorerCopying and Managing Files Tap Start Programs File Explorer Personal tab To copy files to a storage card System tab Managing Your Device Managing Your Device Connections tab To set the date and time Regional settingsDate and time To set the date and time for a different location To set the backlight to dim after a time delay Display settingsTo adjust the screen brightness To increase or decrease the size of text on the screen To change the device name Ringer settingsDevice name On the System tab, tap About Device ID tab To set an alarm Alarms and notificationsTo choose how to be notified about events or actions To access and change settings of phone services Phone servicesOn the Personal tab, tap Phone Services tab To automatically configure the device’s data connections On the Connections tab, tap Connection Setup To configure the Exit button To switch back to a running programTo open Task Manager To add a running program to the exclusive list To close running programs from the Task ManagerOn the Task Manager screen, tap the Others tab Connect the device to an external display Bottom of the device. The TV Out screen opens To set a device password Protect your device with a passwordTo enable the SIM card PIN Protect your SIM card with a PIN Select Encrypt files when placed on a storage card Encrypt files on your storage card To see the available storage card space To see how much memory is available for useOn the System tab, tap Memory Storage Card tab Hard reset Soft resetTo perform a soft reset On the System tab, tap Clear Storage To perform a hard resetClear Storage Enter 1234 and then tap Yes To check for updates Windows UpdateTo set up Windows Update To change Windows Update options Battery Saving Tips Managing Your Device Specifications Regulatory Notices Appendix Specifications System Information Physical Expansion Slot EN 60950-1 IEC Regulatory Agency IdentificationsEuropean Union Notice Etsi EN 300 Etsi EN 301 EN 301Etsi EN 301 908-1 EN 50360 This equipment may be operated Safety Precautions for RF Exposure Exposure to Radio Frequency RF Signals 462 w/kg @10g Head 1.31 w/kg @10g Body SAR InformationPacemakers Hearing Aids Weee NoticeOther Medical Devices RoHS Compliance Appendix Index Index Index Jetcet PRINT Phone Keypad 93 Phone services 278 Photo capture mode Owner Information Make call 53 Voice Commander ZIP