HTC RAPH500 user manual Connecting to an External Display, Encrypt files on your storage card

Managing Your Device  135

Encrypt files on your storage card

You can set your device to encrypt files as they are saved on the storage card.

1.Tap Start > Settings > System tab > Encryption.

2.Select Encrypt files when placed on a storage card.

Notes • Encrypted files can only be read on the device that encrypted them.

•Encrypted files are opened just like other files, provided you are using the device that encrypted them. There is no separate step for you to take to read these files.

Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.

13.6  Connecting to an External Display

The TV Out function outputs the device’s screen contents and audio to an external display with an RCA cable socket such as a television.

Notes • You need an HTCTV Out cable to connect your device to an external display. The HTC TV Out cable is sold separately.

•When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO 3D Music tab, if TouchFLO 3D is enabled. See Chapter 3 about enabling TouchFLO 3D.

•It is recommended that you use an audio accessory (not the HTC TV Out cable) such as the wired headset when you want to listen to music on your device. You can check the HTC web site for other audio accessories for your device.

Connect the device to an external display

1.Turn off the external display.

2.Connect the ends (red, white, and yellow RCA plugs) of the HTC TV Out cable to the external display’s RCA sockets.

3.Connect the mini-USB end of the HTC TV Out cable to the

sync connector at the bottom of the device. The TV Out screen opens.

Note The display automatically changes to landscape mode after connecting the HTC TV Out cable.

4. Choose the video standard to use when outputting the video and then tap Done. For example, if your video is in the NTSC standard and you select PAL-M, TV Out will automatically convert your video to PAL-M before it outputs to the external display.

5.Tap the type of media you want to output.

6.Turn on the external display and then switch it to the input signal that you connected the HTC TV Out cable to (for example, Video 1).