HTC RHOD210 user manual Connecting to Car Kit Phones

Bluetooth 193

9.6 Connecting to Car Kit Phones

Bluetooth car kit phones that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download device and/or SIM contacts from your device to the car kit phone, and use the car kit phone to answer and make calls.

1.On the Home screen, slide to the Settings tab, tap Communications, and then tap Bluetooth.

2.Turn Bluetooth on and set your device to visible mode. For instructions, see “To turn Bluetooth on and make your device visible” earlier in this chapter.

3.On the Settings tab ( ), tap Advanced.

4.Scroll down and tap SIM Access.

5.Select the Enable SIM Access Profile (SAP) check box, and then tap Done.

6.Connect the car kit phone to your device via Bluetooth. For instructions, refer to your car kit phone’s manual.

7.If this is the first time you are pairing the car kit phone with your device, enter the car kit phone’s passcode on your device.

8.A pop-up message should appear on your device saying that a connection has been established between your device and car kit phone. Tap OK.

Note You are not able to make and receive calls, send and receive messages, or perform related activities on your device when the SIM Access Profile connection is active. You’ll be able to make or receive calls from the car kit phone during this time. After the connection is disconnected, you will be able to use your device as before.