Humax IHDR-5200C user manual Power Management, Conditional Access

System

Power Management

MENU Settings System Power Management

Setting Power Saving in Standby

You can minimise the standby power consumption to below 1W.

1.Select Power Saving in Standby.

2.Select On to deactivate the certain features and minimise the power consumption.

Setting Automatic Power Down

The receiver automatically enters standby mode for power saving if no user interaction occurs for 3 hours.

1.Select Automatic Power Down.

2.Select On to enter standby mode automatically if no user interaction occurs for 3 hours.

Note: The message will be displayed before entering standby mode. If no selection is made for 30 seconds, the receiver enters standby mode automatically.

Conditional Access

MENU Settings System Conditional Access

You can check the information of the Smart Card status, SoftCell Service status, Loader status, and Conditional Access components.

56

Menu On/Off Select Confirm Enter 0~9