Humminbird ID 600 specs

press the ON-OFF button while within the Fish ID menu. Pressing the ON-OFF button again reactivates the ID function.

Image 28

Humminbird ID 600 manual

Contents

Page Installation Overview AccessoriesParts Supplied Determining How to Mount the Transducer Alternate Transducers and Mounting Methods Portable MountingTrolling Motor Mounting Thru-Hull Mounting Beginning Installation Transducer Exchange Transom Installation Step One Determine Where to Mount the Transducer Step Two Drill the Mounting Holes Step Three Assemble the Transducer Step Four Mount the Transducer to the Transom Step Five Adjust the Running Position of the TransducerConfirm the pivot angle has not changed Page Step Six Route the Cable Step One Determine the Mounting Location Inside the Hull InstallationStep Two Test the Mounting Location Page Step Three Permanently Mount the Transducer Step One Determine Where to Mount Control Head InstallationStep Two Connect the Power Cable to the Boat Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operation Test the Installation Installing the SeaScope ID600 Gimbal Mount Installation Testing the Installation Using the Built-In Simulator Using the SeaScope ID600Operating the SeaScope ID600 Factory setting +0/FEET Sensitivity Bottom Alarm Fish Alarm Zoom Bottom Lock Display Speed Depth Range Fish ID