C7
Insert mounting screws, leaving space between the screw head and the joist. (Screws are supplied.)
C8 |
Attach the rails onto the screws.
C9C10
3”
Tighten screws. | Run the power supply wire through the strain relief, leav- | |
ing 3” between the end of the wire and the strain relief. | ||
| ||
| Tighten the strain relief around the wire. |
C11 |
Install the wiring and the strain relief into the wiring
access hole you made earlier.
C12 |
Connect 4” duct and vent to the outside. Use duct tape to secure joints. If ducting does not fit securely, an adapter may need to be purchased.
11 |