Manuals / Hunter Fan / Household Appliance / Fan

Hunter Fan 82043 manual C2 OR, C5C6, 43045-01 10/15/2009, Pop out a wiring access slug

Models: 82043 43045

1 18

Download 18 pages 43.47 Kb

Page 10

Image 10

C2

Pop out a wiring access slug.

	5/8	5/8
		1/2
	1/2

Slide the mounting rails into brackets.	Using the depth markings on the housing, position the
	bottom edge of the housing so that it will be flush with the
	sheetrock.

C5C6

Mark position of screws by using holes as a template.

Drill a pilot hole at the TOP of each outline, AS SHOWN.

43045-01 10/15/2009

Page 10

Image 10

Hunter Fan manual C2 OR, C5C6, 43045-01 10/15/2009, Pop out a wiring access slug, Slide the mounting rails into brackets

Contents

READ and SAVE THESE INSTRUCTIONS Energy Star Bath Fan ModelsW a r n i n g Figure A43045-01 210/15/2009 TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING43045-01 310/15/2009 Housing Before Installation43045-01 410/15/2009 Wiring Cover43045-01 510/15/2009 Choose Installation OptionFor New Construction - attaching to joist, go to step A1, page Remove the fan assembly from the housing43045 A1 ORSection A - New Construction - attaching to joist Pop out a wiring access slugSection B - New Construction - suspended between joists B1 ORVaya a la sección E - Instalación Final en la página 43045-01 710/15/20091/16” bit Mark position of screws by using holes as a template43045 Drill a pilot hole at the TOP of each outline43045-01 Section C - Existing Construction - accessible from aboveNO EXISTING FAN Vaya a la sección E - Instalación Final en la página43045-01 10/15/2009 C2 ORC5C6 Pop out a wiring access slug10/15/2009 C9C1043045 head and the joist. Screws are suppliedEXISTING FAN Section D - Existing Construction - accessible from belowD1 D2 Vaya a la sección E - Instalación Final en la páginaVaya a la sección E - Instalación Final en la página Move the housing into the ceilingInstall the wiring and the strain relief into the wiring access 43045-01 10/15/2009Install the wiring cover box. Make sure all wiring connec Section E - Final InstallationConnect the wiring as shown tions are inside the wiring cover box43045-01 10/15/2009 Install the strain relief bracket. DO NOT ALLOW THEPlug in wiring harness screwsInstall light bulb cover Install light bulbsInstall night light Restore power at the sourceTrouble Shooting Preventative MaintenanceMaintenance 43045-01 10/15/2009Warranty Trouble Shooting cont43045-01 10/15/2009

C2

Slide the mounting rails into brackets.

C5C6

43045-01 10/15/2009