Section E - Final Installation
E1 |
|
|
| Ground |
|
|
| Black |
| Green |
|
| 2 Pin |
|
| A | Bare Copper |
|
| White |
| ||
|
|
|
| ||
Fan Motor |
|
|
| Black | Main Switch 1 (AC In) |
Night Light |
| White |
|
| White |
| Red Night Light |
|
| ||
| 3 Pin |
|
| ||
Light | Black | Light |
|
| |
| Red | Switch 1 (AC In) | |||
|
| *Option | |||
|
|
|
| ||
*Option Fan & Main Light Together | Black | Switch 2 (AC In) | |||
|
| ||||
Connect the wiring as shown.
E2
Install the wiring cover box. Make sure all wiring connec-
tions are inside the wiring cover box.
NOTE: Though this final installation section shows the housing mounted to a joist, the final installation procedure is the same
whether the housing is mounted to a joist or suspended between joists.
E3 | E4 |
Connect fan wiring harness. DO NOT ALLOW THE FAN TO | Install the fan assembly by inserting the tabs as shown and | |
pushing the fan assembly into the housing. Make certain the | ||
HANG FROM THE WIRING HARNESS. INSTALLATION IS | ||
wiring is not pinched between the fan | ||
EASIER IF TWO PEOPLE ARE INVOLVED. | ||
assembly and the housing. | ||
|
14
