Manuals / Hunter Fan / Household Appliance / Fan

Hunter Fan 43045-01, 10/15/2009, thumbnuts, Install light bulbs, Install night light, Complete

Models: 82043 43045

1 18

Download 18 pages 43.47 Kb

Page 16

Image 16

E11

Secure the fan assembly by tightening the two fan mounting

thumbnuts.

E12

Install light bulbs.

E12

Install night light.

E13

Install light bulb cover.

E15	E9
Complete.	Restore power at the source.
16
43045-01	10/15/2009

Page 16

Image 16

Hunter Fan 82043 43045-01, 10/15/2009, thumbnuts, Install light bulbs, Install night light, Install light bulb cover

Contents

READ and SAVE THESE INSTRUCTIONS Energy Star Bath Fan ModelsFigure A 43045-01 210/15/2009W a r n i n g TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY, OBSERVE THE FOLLOWING43045-01 310/15/2009 Before Installation 43045-01 410/15/2009Housing Wiring CoverChoose Installation Option For New Construction - attaching to joist, go to step A1, page43045-01 510/15/2009 Remove the fan assembly from the housingA1 OR Section A - New Construction - attaching to joist43045 Pop out a wiring access slugB1 OR Vaya a la sección E - Instalación Final en la páginaSection B - New Construction - suspended between joists 43045-01 710/15/2009Mark position of screws by using holes as a template 430451/16” bit Drill a pilot hole at the TOP of each outlineSection C - Existing Construction - accessible from above NO EXISTING FAN43045-01 Vaya a la sección E - Instalación Final en la páginaC2 OR C5C643045-01 10/15/2009 Pop out a wiring access slugC9C10 4304510/15/2009 head and the joist. Screws are suppliedSection D - Existing Construction - accessible from below D1 D2EXISTING FAN Vaya a la sección E - Instalación Final en la páginaMove the housing into the ceiling Install the wiring and the strain relief into the wiring accessVaya a la sección E - Instalación Final en la página 43045-01 10/15/2009Section E - Final Installation Connect the wiring as shownInstall the wiring cover box. Make sure all wiring connec tions are inside the wiring cover boxInstall the strain relief bracket. DO NOT ALLOW THE Plug in wiring harness43045-01 10/15/2009 screwsInstall light bulbs Install night lightInstall light bulb cover Restore power at the sourcePreventative Maintenance MaintenanceTrouble Shooting 43045-01 10/15/2009Warranty Trouble Shooting cont43045-01 10/15/2009

Secure the fan assembly by tightening the two fan mounting

thumbnuts.

Install light bulbs.

Install night light.

Install light bulb cover.

Complete.

Restore power at the source.